T**S
发帖数: 319 | 1 比如要在远端(sshd server)上开一个xterm，要显示在server端，而不是在client上。
thanks. |
|
z**r
发帖数: 17771 | 2 开始怀疑你的server把sftp subsystem 关掉了，但是config里还在，现在十分怀疑的
sftp subsystem 有问题，你/etc/init.d/sshd restart一下，或者/etc/init.d/ssh
restart |
|
z**r
发帖数: 17771 | 3 他可能没有root权限，俺一开始就要了sshd -d，他没提供，俺估计是没有权限 |
|
x**m
发帖数: 941 | 4 没有去查，但是想来SSHd是以root运行的吧。加上这个是普通服务器不是嵌入式系统，
不能正常写入的可能要小些。我感觉有点什么问题，说不定那个学生在上面胡玩呢。 |
|
S*A
发帖数: 7142 | 5 I think pretty stander openwrt/ddwrt with sshd tunnel can
do that. Most openwrt/ddwrt come with ssh server by default.
Warning, make sure what do you is allowed in your company's
policy. There is a reason company put firewall or limit their
web access. In the worse case, punch holes on their firewall
like that might get you fired. |
|
r****t
发帖数: 10904 | 6 他 sshd port forwarding 和防火墙没啥关系吧？ |
|
|
x**m
发帖数: 941 | 8 cygwin
安装的时候选择openssh，然后找个教程配置sshd就可以了。没有做过的话，半个小时
差不多搞定。 |
|
r****t
发帖数: 10904 | 9 that's weird. I have no idea now. what if you set DISPLAY=:0 and "xhost +"
on the sshd server just to try? |
|
|
N****w
发帖数: 21578 | 11 那也不用打扰其它用户啊
新跑一个 sshd 就行了 |
|
r****r
发帖数: 1839 | 12 一个老机器装了Fedora 14，我的目的是装一个最简单的服务器只运行sshd和httpd，
用Router Port Forwarding和Dynamic DNS。现在设置BIOS可以没有鼠标、键盘和
显示器，别的功能也都成功了，但机器必须有显卡才能启动。我想把显卡拔出来，
毕竟它是一个耗能大户，但一拔出来机器就拒绝启动。有办法么？机器现在是在
Level 3运行。 |
|
S*A
发帖数: 7142 | 13 Can you use cygwin sshd service?
You even use ssh tunnel into the server if you want to be fancy.
的东 |
|
|
h*******x
发帖数: 12808 | 15 sshd？这个怎么用？
能在windows里面搞出一个盘吗，想访问本地硬盘一样那种？
我总不能没事scp玩。 |
|
h*******x
发帖数: 12808 | 16 怎么让putty启动本地的bash呢？
putty似乎一定要用通过ssh，telnet进去。
我又不想让cygwin启动一个sshd/telnetd之类。 |
|
h****i
发帖数: 94 | 17 thanks. Yes I did restart the sshd by:
sudo service ssh restart
nx |
|
c******n
发帖数: 4965 | 18 but here's what I dont' understand:
I checked the packets in wireshark.
the first packet sent out by client is REAL_IP_OF_CLIENT_BOX to 127.0.0.1
I thought according to the tutorial http://www.frozentux.net/iptables-tutorial/images/tables_traverse.jpg
after DNAT changes the dest IP, it goes through another routing decision, so
at this step it should be set to the lo interface, so MASQUERADE should set
its source to be 127.0.0.1 ???
also wireshark shows that the return ip is $EXTERNAL_BOX_IP to ... 阅读全帖 |
|
p******g
发帖数: 347 | 19 This is really driving me crazy.
I am trying rsa public key to login to difference users in a remote RHEL6
box.
I created the rsa key in my local ubuntu box. I use ssh-copy-id to copy the
pub key to different users on the remove servers.
The pub key works for user1, but not for user2. On REHL6 box I copied the /home/user1/.
ssh/authorized_keys to /home/user2/.ssh/authorized_keys, then my local pc's
rsa key works for user2@RHEL6.
But the two authorized_keys are identical.
Here's it:
-bash-4.1$ ls... 阅读全帖 |
|
N******7
发帖数: 1297 | 20 这个是正解，其实是~/.ssh必须是0700，authorized_keys文件必须是0600或0400
整个.ssh目录不能给g或o任何权限，要不sshd不会用。 |
|
b***i
发帖数: 3043 | 21 新的信息
大神帮看看那里可以提高？
[ 0.128265] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz
[ 0.129791] tps65910 1-002d: JTAGREVNUM 0x1
[ 0.133728] print_constraints: VRTC:
[ 0.135223] print_constraints: VIO: at 1500 mV
[ 0.137603] print_constraints: VDD1: 600 <--> 1500 mV at 1100 mV normal
[ 0.139923] print_constraints: VDD2: at 1100 mV
[ 0.140960] print_constraints: VDD3: 5000 mV
[ 0.142425] print_constraints: VDIG1: at 1800 mV
[ 0.143890] print_constraints: VDIG2: at 1800 mV
[ ... 阅读全帖 |
|
B********e
发帖数: 1062 | 22 启动ssh后， 机器自动连到下面的地址.
tcp 0 0 192.168.1.37:ssh 115.231.73.82:57536
ESTABLISHED 6723/sshd: root [pr |
|
h**********c
发帖数: 4120 | 23 公钥要和服务绑定才算安装了
比如~/.ssh 里的公钥绑定指定用户到sshd
又比如httpd的公钥通过httpd.conf 或ssl.conf来定义。
否则就是硬盘上的一串字节而已 |
|
s*******l
发帖数: 3691 | 24 在docker里面安装sshd服务和sftp服务，然后暴露端口到host不可以么？ |
|
|
|
k****j
发帖数: 10 | 27 【 以下文字转载自 Database 讨论区,原文如下 】
发信人: ksnkjj (ksnkjj), 信区: Database
标 题: SSH与MySQL冲突？
发信站: The unknown SPACE (Mon Jul 8 17:55:13 2002) WWW-POST
首先说明，这不是利用ssh做tunnel的问题。
在windows2000装mysql的win32版本。另安装cygwin包含sshd服务器。
在本地启动mysql客户端，登陆数据库没有问题。
在远端机器用ssh客户端(putty或cygwin的ssh,ssh2或ssh1)登陆本地机器后，使用mysql
客户程序登陆数据库，没有响应。例如
./mysql --username=xxxx --password=xxxx后，屏幕不出现任何信息。敲回车键会换行
，但是仍然没有任何信息出现。只能Ctrl-C退出。
mysql.ini试了skip-networking，无论enable或disable都一样。
是mysql配置问题还是ssh和mysql冲突? |
|
p******f
发帖数: 162 | 28
default is good enough, try to run as root if possible.
really? suppose you know sshd runs as root, and apache runs
as nobody, is it useful? |
|
q**1
发帖数: 193 | 29 System: Linux/Ubuntu6.06
过去二个星期里面共收到２００００多sshd相关的ｌｏｇ信息
查/var/log/auth 显示有人一直在试我的ｓｓｈ的登陆密码。
不知道有何方法防止这类ｈａｃｋｅｒ的侵入..
//多谢 |
|
T*******x
发帖数: 8565 | 30 sshd更复杂。我看了一下安装方法，头都大了。 |
|
|
a***s
发帖数: 1084 | 32 I know Im wrong.
Just man it on my bsd box:
said:
....The DISPLAY value set by ssh will point to the server
machine...
It means you connect with evn DISPLAY , the sshd will use
xauth to spool
X tunnel, but I got a "Warning: Remote host denied X11
forwarding." when use
a Cygwin with X, and got no such warning from WinSSH client
and X11 apps are
not working alright. |
|
o***z
发帖数: 133 | 33 【 以下文字转载自 Linux 讨论区 】
【 原文由 ottoz 所发表 】
以前用redhat的时候，每天root都能收到一封mail,
里面有sshd和ftpd的用户登录记录，现在换了mandrake，
root收不到信了，不知该怎么设？ |
|
c*****e
发帖数: 32 | 34
If you just want a X server, there're several other tool more effective than
the Xfree86 came with the latest Cygwin.
My opinion's that CYGWIN is much much more than a X server. It provides
a virtual UNIX like platform for lot of UNIX based tools which are more
convenient than those of Windows based. In my case, I use cron, YoSucker,
Fetchmail to check all my mailboxes periodly. I setup a sshd on my machine,
so I can access my working machine from home, even it's a windows machine.
I debug and |
|
m***m
发帖数: 67 | 35 I need setup a lab for teaching, the user is not me, they are undergraduate
student, and i have to configure everything as automatic as possible.
just run into problem with CYGWIN, the cxterm doesn't compile there.
It's good to know it even can setup system daemon like sshd. let me try try. |
|
o***z
发帖数: 133 | 36 maybe it just doesn't want telnet clients
is there a sshd running? |
|
T********r
发帖数: 6210 | 37 Probably sysadm already deleted in.telnetd. You should try other
methods to login the system and obtain shell, i.e. ssh.
ps -ae | grep sshd
or
telnet localhost 22 |
|
p*******a
发帖数: 15 | 38
没有这个sshd
还是不行，还有其他办法没？
天哪，看来这个机器算完了。谢谢大家 |
|
