由买买提看人间百态

topics

全部话题 - 话题: sig
1 2 3 4 5 6 7 8 9 10 下页 末页 (共10页)
g****n
发帖数: 3313
1
来自主题: GunsAndGears版 - Sig P226 elite dark $960?
http://www.recguns.com/Sources/IIIC2q7.html
III. Firearm Information by Type
C. Semi-Automatic Pistols
2. Models and Manufacturers
q. Sig Sauer
7. Are Sig Aluminum Frames Weak?
by Peter Jordan
I have recently seen on the net that some people believe the aluminum frame
on the SIG is inferior or weak. Their erroneous solutions vary:
Don't buy a Sig because it has an aluminum frame. Instead buy an all steel
gun or a polymer type. NONSENSE.
Don't use hot loads like a COR-BON 135 grain 40S&W load, ot... 阅读全帖
s******9
发帖数: 1451
2
来自主题: GunsAndGears版 - 也挖个.357 Sig 的坑吧
同样口径之下,弹头轻的一般都比弹头重的动能大。这是简单的物理,因为能量与速度
平方成正比。查一下每个口径各自在不同弹头重量下的ballstic chart 就很清晰。以.
357Sig 为例:
Ballistic performance
Bullet weight/type Velocity Energy
115 gr (7 g) Doubletap Bonded defense JHP 1,550 ft/s (470 m/s) 614 ft
·lbf (832 J)
125 gr (8 g) Doubletap FMJ-FP Match and Bonded defense JHP 1,450 ft/s (
440 m/s) 584 ft·lbf (792 J)
147 gr (10 g) DoubletapBonded defense JHP 1,250 ft/s (380 m/s) 510 ft
·lbf (690 J)
再比如说45Auto, 230Grain弹头,能达到400多ft.lbf 动能就不错了。若要动能超过
500,弹... 阅读全帖
c*******r
发帖数: 593
3
来自主题: GunsAndGears版 - sig M400如何?
(ZT)
http://www.ar15.com/forums/t_3_118/584620_.html
"I have both. The Sig M400 compares nicely to the LE6920. Here's how they
stack up.
Both have an F marked front sight base.
Both have M4 feed ramps cut before anodizing.
Both have chromed chamber and bores.
Both have equal staking on the gas key and castle nut.
Colt has an M16 bolt carrier.
Sig has an enhanced AR15 bolt carrier.
Colt bolt is MP marked.
Sig bolt is not MP marked although Sig states their supplier MP tests all
bolts, whether the... 阅读全帖
f*********n
发帖数: 11154
4
来自主题: GunsAndGears版 - 关于Sig P226的讨论
Sig的德国产vs.美国产的质量问题一直有争议。我觉得下面这个sig forum上的说法很
切合实际:
Justified or not, many have a strong perception that German build equals
better quality. Personally, I think that has to be evaluated on a case-by-
case basis.
One real difference is that folded carbon steel slides (P228, early P226,
P225) are only made in Germany, as are Ilaflon slide SP-2022s.
Then the question of German built parts vs. full German assembly comes into
play, as many SIG models have parts made in Germany but assembled in the US... 阅读全帖
f*********n
发帖数: 11154
5
来自主题: GunsAndGears版 - 关于Sig P226的讨论
Sig的德国产vs.美国产的质量问题一直有争议。我觉得下面这个sig forum上的说法很
切合实际:
Justified or not, many have a strong perception that German build equals
better quality. Personally, I think that has to be evaluated on a case-by-
case basis.
One real difference is that folded carbon steel slides (P228, early P226,
P225) are only made in Germany, as are Ilaflon slide SP-2022s.
Then the question of German built parts vs. full German assembly comes into
play, as many SIG models have parts made in Germany but assembled in the US... 阅读全帖
o****n
发帖数: 1520
6
来自主题: GunsAndGears版 - MD/PA Group buy Sig Sauer, ends 7/14
原贴链接:http://www.mdshooters.com/showthread.php?t=86012
SIG SAUER GROUP BUY FOR THE FOLLOWING FIREARMS:
(1.) SIG P290 9MM 6 R0UND NIGHT SIGHTS BLACK; MFG#290-9-BSS
(2.) SIG P229 40S&W 12 ROUND BLACK NIGHT SIGHTS; MFG#E29-40-BSS
(3.) SIG P226R 9MM 20 ROUND TACTICAL OPERATIONS; MFG# E26R-9-TACOPS
(4.) SIG P226 MK25 1913 3- 15 ROUND MAGAZINES; MFG#M25
(5.) SIG P226 9MM 15 ROUND BLACK E2 GRIPS; MFG#E26R-9-B
(6.) SIG MOSQUITO 22LR 10 ROUND THREADED BARREL; MFG#MOS-22-B-TB
(7.) SIG SIG 1911 22 OD GREEN ... 阅读全帖
q***x
发帖数: 94
7
来自主题: GunsAndGears版 - An excellent deal of sig 229 9MM at buds now
Many new Chinese gun buyers are waking up after recent Houston tragedy and
are looking for the first reliable HD weapon, I just found out this great
deal yesterday and I highly recommend it after I confirmed some critical
details today.
brand new, life time warranty, sig 229 with night sights, 9MM, 15rds
capacity, $650 shipped
http://www.budsgunshop.com/catalog/product_info.php/cPath/21_28
(deal found from slickguns.com or gunwatcher.com, bookmark them)
cheapthandirt also has the same deal. But... 阅读全帖
q***x
发帖数: 94
8
来自主题: GunsAndGears版 - 求助!Sig Mk25的问题
各位班上高手新手好,一点管见。
买SIG,就好比买奔驰宝马,the only problem is money, no any other problems.
sig mk25 is one sig 226 variant. I own a sig 229. It has a little more
slight rattling than a sig 226 I handled in the shop. My sig 229 shoots well
, daily carry, no problems, so I'd have no concerns of some rattling in the
mk25 you have. You can do some light cleaning and oiling after learning from
youtube, then go to a range and test fire.If you really want to do it safe,
take a basic training class in any range, w... 阅读全帖
w*******y
发帖数: 60932
9
Link:
http://www.cheaperthandirt.com/69931-1.html
Here's a new deal for this gun and it's not a bad one at all. It's $367.38
and $10.99 shipping for me (I assume everyone because that's a weird
shipping cost.
This is a fantastic gun and one of the best budget guns you can get. It's a
Double Action/Single Action pistol like all the other Sig's but it has a
polymer frame.
Only comes with 1 Mag which is standard but if you can wait, CDNN
Investments normally puts their mags on sale every so often f... 阅读全帖
L********1
发帖数: 710
10
来自主题: GunsAndGears版 - sig P226拿到了

说到这些,俺又忍不住要提新老Sig的比较。不少人对此不以为然,觉得美产新Sig和德
产老Sig一样好。其实,这里不仅仅是个产地的区别,还有一个时间问题。Sig自从输了
美军的合同,随后又赢了几个特种部队的合同,从Navy Seal 到SAS。在上世纪80年代
末到90年代,Sig很下了一些功夫 to build reputation。而且那时候产量小,产地单
一,质量控制也容易。到后来名气大了,产量也高了,生产也全球化了,质量下降是必
然的。不仅Sig,整个军火工业,质量其实都有下降。从可靠性来看,美产新Sig一般不
比老Sig差,但是在细节上,新枪出现这样那样小问题的几率就偏高了,虽然很多是
Cosmetic的,但是客户化八九百买一支手枪,完全有理由要求各方面都Perfect。而且
这并不是做不到的,因为德产老Sig就做到了。很少听到有人抱怨德产老Sig有这样那样
的问题,差距就在细节上。
q***x
发帖数: 94
11
来自主题: GunsAndGears版 - An excellent deal of sig 229 9MM at buds now
Today I came to an ffl dealer to accept the two-tone sig 229 (police version
) I just ordered from the link above and I was pleasantly surprised.
The police version is really manufactured for LE usage. The stainless steel
slide is not naturally shiny like a civilian version. It is coated like sand
blasted, to reduce any possible glare in police operations. The look is
like in this web page,
http://www.ar15.com/mobile/topic.html?b=5&f=14&t=10434&page=32
the 4th picture of a sig 229 with a silver ... 阅读全帖
c*****y
发帖数: 5747
12
来自主题: GunsAndGears版 - sig P226拿到了
现在的SIG 226 是德国生产散件,美国组装。
美国咋组装个枪都不灵啊!
包装盒子的确太丢人了。
不过这么多人狂挺SIG,一定是有道理的。
俺的那个枪店老板已经成了俺的渔友。他说让他选一万次都选SIG!
他自己七把手枪,四把SIG!
不过俺通过这把SIG估计多半回归HK了。俺是个没啥枪文化的人,俺认为射击精度和做工都很重要。
SIG 的做工比起HK的德国原产货真是差太远了。
喜欢SIG的兄弟别生气啊!我想SIG的口碑就在于射击精度吧!
s*******n
发帖数: 12995
13
我这里对比的祖孙三代,不是指的生产年份,而是设计原理。
爷爷:2008 Springfield Trophy Match (SA TM)
儿子:1965 Sig P210-2
孙子:2010 Sauer P210 Legend
为啥要对比:
这三款single action, single Stack 的手枪是一脉相承,而且都是以精准著名,但在
这里我不打算对它们的精准性做实弹对比,因为它们的精准度都已经远超过我的能力。
厂家规格:SA TM 散布 2”@ 25码但没有跟靶纸,Sig P210跟的靶纸10shots 2"@50米
,Sauer P210 Legend跟的靶纸5shots 2"@25码。
做工:
如果仅从外观,P210 Legend的做工最好,其次是 SA TM,最后是 P210-2。但是,枪一
到手,拉几下slide,高低立分,P210-2的所谓的紧和滑,要高出其他两款很多,整一
把枪,感觉是一个piece,而P210 Legend和SA TM明显感觉是是由不同部件组装起来的,
但P210 Legend又要比SA TM好一些。这种瑞士手工fitting的紧滑,才是sig... 阅读全帖
k**********i
发帖数: 8706
14
Free Sig Sauer Acessories w/ Pistol purchase
Just got this in an email from Sig:
From now through December 31, 2008, get FREE SIG SAUER accessories worth
more than $200.00 when you purchase any SIG SAUER Classic* or 1911 pistol.
Simply send your sales receipt and a copy of your 4473 along with your name,
address, email and phone number and we will send you:
a SIG SAUER Tactical Light,
& SIG SAUER Dual Retention Holster,
& SIG SAUER double magazine pouch
& an extra magazine.
Hurry, offer good thr
S***Z
发帖数: 1029
15
来自主题: GunsAndGears版 - 活塞AR? HK vs Sig? Sig 556 vs 516 ?
经过几轮裁军,我现在也有些心动,想进一支长枪。如果没有Import Ban,选择会很容
易,米多就上Sig Arms 550,米少就国产AK。可惜这些都被禁了。现在的AK,不但鱼龙
混杂,而且价格不菲,所以没啥信心。AR又让人眼花缭乱,不知所从。
最近也在做功课,比较Sig 556,551A1,516,和其它AR,包括Sig M400。
首先有Sig Arms 550,这个从工作原理上更接近AK,所以被称为 Swiss Designed AK。
可惜美国不准进口。
Sig 556 基本就是550的Upper设计,加上AR的 Lower(但部件并不通用),用AR弹夹。
早期有一些QC问题,
大家意见比较大,据说后来问题一一得到纠正,现在的Sig556好像口碑不错。
现在新出的Sig551A1,大致就是550。它的Upper和556的一样,Lower是550的设计,用
料和制作工艺可能有些不同,但设计是一样的,用瑞士弹夹,不用AR弹夹。单独买一个
551A1的Lower,可以把556转成551A1。
556和551A1都有不少瑞士产的配件能换,可以烧不少钱。
516是Sig版的Piston... 阅读全帖
q***x
发帖数: 94
16
来自主题: GunsAndGears版 - 想买Glock 19或者Sig P226
Can afford a sig? buy a sig, a full metal gun, better quality, German gun,
你懂的
Plan to do CCW? go with sig 229 with nigh sights; no CCW, buy a sig 226 with
nigh sights. Any brand new sig 226/229 will exceed your skills and
requirements.
There are so many posts/discussion on this site about glock, sig 226, sig
229, do a search and read by yourself.
Good luck !
w*******y
发帖数: 60932
17
OK trying this one again as well. I have this mini 1911. It is a sick
little gun and this with the laser is a crazy deal.
Link:
http://www.deansgunshop.com/SIG-SAUER-P238-380-6RD-BLK-W-LASER-
Deans Gun Shop offers Sig Sauer P238 .380 ACP Nitron with Laser. Reacting to
many requests from the marketplace for a subcompact SIG SAUER pistol,
engineers designed the new P238 as a smart looking, small handgun built with
the same accuracy and reliability as large frame SIG SAUER pistols. With an
overal... 阅读全帖
w*********p
发帖数: 7230
18
来自主题: GunsAndGears版 - SCAR vs Sig 556 (1)
SCAR弄回来了,虽然safety好像有问题,不过玩了玩
1.scar比sig 556轻一些,主要是不象sig 556一样大头沉,balance比较好,一个手拿枪,感觉比较明显
2.枪托看着比较笨重,实际上很好受,尤其是拖腮比较舒服,我的sig556是最基本的,就是一个很简单的可伸缩的stock,而且晃里晃荡
3.有人说枪托折叠后没法扣扳机,实际上没问题,空间足够
4.整体的做工我觉得scar好不少,sig 556的upper和lower结合处不严,会晃,网上的说觉得不爽就掂点东西,sig 556的handguard野游点晃
5.sig 556的trigger是2 stage的,网上对scar的trigger评价不好,我没打过,没法评价
6.scar是free floating,sig556不是
7.分解scar真的很容易,一个pin取出来,lower就下来了,sig 556的pivot pin比较变态,要一左一右用改锥拧,而且是用胶粘上的,很难弄下来,很多人都把枪挂花了,我也是
8.charging handle在左面我比较喜欢,而且可以换到右边,magazine release也是
c*****y
发帖数: 5747
19
来自主题: GunsAndGears版 - SIG,想说爱你也不是很容易的事!
今天俺打了200发P226,至今为止,俺的226已经打了约一千五百发。
SIG的手感终于被俺练出来了,打十米靶,十五发必有两三发贴红心(或者在红心附近)。
关于SIG,俺有着说不出的复杂感受,枪是好枪,买的闹心,用着也闹心。
买枪不说了,跟版上兄弟有同样的感受,也发了不少抱怨贴。
用枪俺已经快疯了,俺的15发弹夹,压满了,三次就有一次卡弹。压十发就没有问题。
大伙儿说这是不是弹夹的问题。
俺把弹夹拆开,发现内壁很脏,清洗上油后没问题了,打了几次,老毛病又犯了,五六
次总有一次卡弹,看来是弹簧力量不够了。准备明天给SIG写信投诉。
在这儿俺必须强烈赞颂一下HK,德国制造就是质量有保证,甭说枪身做工了,HK的弹夹
拿出来和SIG弹夹一对比,SIG的简直就是山寨版了。而且俺的HKP30也打了小一千发了
,没一发有问题,子弹都是一样的PMC九毫米。
唉!SIG,想说爱你也不是很容易的事!
a***a
发帖数: 8941
20
来自主题: GunsAndGears版 - 活塞AR? HK vs Sig? Sig 556 vs 516 ?
这个话题有点大。
最近对于活塞AR有点兴趣,不过没有预算,姑且做些预先研究吧
市场上的活塞AR,据说做得好的不多,因为AR本来设计就不是用活塞的,所以用了活塞
之后反而可能不可靠
名牌的的Sig和HK如何?
HK416的可靠性是经过考验的,比美军的M4好多了,但是HK的价格让人望而却步,民版
的MR556的一个upper都要卖2000刀
Sig就便宜多了,516整枪就1500刀左右。但是一分钱一分货似乎在美国是比较有道理的
,MR556是不是比Sig的好很多呢?
就论Sig自己,516和556有啥本质不同呢?我也刚刚研究这个,问外行问题,大家不要
拍砖扁我。看Sig网站上说556是piston的,但是516是 gas pushrod,这个是啥玩意儿
?不是活塞么?
O*******e
发帖数: 6055
21
来自主题: GunsAndGears版 - 入了SIG P226 海军版MK25
SIG SAUER warrants that the enclosed firearm was originally manufactured
free of defects in material, workmanship and mechanical function. For the
lifetime of the original purchaser, SIG SAUER agrees to correct any defect
in the firearm for the original purchaser by repair, adjustment or
replacement, at SIG SAUER' option, with the same or comparable quality
components (or by replacing the firearms at SIG SAUER' option); provided,
however, that the firearm is returned unloaded and freight prepaid... 阅读全帖
w*******y
发帖数: 60932
22
Link:
http://www.cheaperthandirt.com/ItemDetail.aspx?sku=76575
Cheaper than Dirt has a FULL SIZE Sig Sauer P226 for $634.94 plus shipping.
Shipping came out to $10.99 for me. This is the diamond plate slide model.
If you really don't like the slide, you can always buy a Caliber X-Change
kit and just use that new slide and sell this old one (actually they do sell
pretty good on gun broker as some people love them and some don't).
This is a great gun. It uses a Double Action/Single Action system a... 阅读全帖
N****g
发帖数: 5172
23
☆─────────────────────────────────────☆
tingtingliu (芙蓉一出,谁与争峰,千秋万代,一统江湖) 于 (Fri Jul 17 10:16:02 2009, 美东) 提到:
虽然拿到usps的保险上的sig
☆─────────────────────────────────────☆
unknowns (我怎么有这么多不知道的东西) 于 (Fri Jul 17 10:20:31 2009, 美东) 提到:
en. cmft..不是visible online的 ,基本没戏
千万不要听邮局的. either sig+保险 or signature only

虽然拿到usps的保险上的sig
☆─────────────────────────────────────☆
tingtingliu (芙蓉一出,谁与争峰,千秋万代,一统江湖) 于 (Fri Jul 17 10:23:34 2009, 美东) 提到:
不过第一次 pp判卖家 win了
朋友把usps的sig fax过去
但是后来买家 第二次pp争议
b******o
发帖数: 5644
24
来自主题: GunsAndGears版 - 有人玩过SIG的1911吗?
我觉得他是一个很好的生意人。大家都知道80-20r rule吧。如果SIG致力于将现在美国
生产的产品的质量恢复到德国的水平,可能会话很多精力。毕竟人文传统就不一样。但
是,如果只是淌淌1911这滩浑水,不用做到最好,以SIG的基础,可以有很好的建树。
两千以下的1911,都会有人说着说那。但从没有人说SIG的(二代)。或者说,关于SIG
的负面评论比任何另外一家都少。想想SIG毕竟也是service pistol。

1911
l******8
发帖数: 9475
25
http://www.sigsauer.com/CatalogProductDetails/p229-dak.aspx
The P229® DAK™ is the standard pistol of the Dept. of Homeland
Security and the U.S. Coast Guard who selected the P229 after a 3 million
round grueling torture test. A favorite among law enforcement professionals,
the P229 offers compact size, choice in firepower of 9mm, .357 SIG or .40 S
&W, tactical versatility of an accessory rail, double-action only and the
unbeatable performance that only comes from SIG SAUER® all in ... 阅读全帖
a***a
发帖数: 8941
26
来自主题: GunsAndGears版 - CZ75比Sig差在哪里?
本来一直对CZ75印象不怎么样,主要是不喜欢那样子,感觉脖子和身子都太长,还驼背
。也从来没碰过。不过枪的样子好不好看,向来是见仁见智,有人就觉得CZ75性感无比
。这个是个人品味,跟枪的性能无关。
自从我打过了Hezter同学的CZ75D PCR之后,感觉超好。这把枪因为是compact的,外形
上我也觉得好看一点,手感也超好,打起来的扳机感觉也很好。就我粗粗看来,觉得挑
不出来什么明显的毛病,唯一我觉得有些不太好的就是虎口位置偏低。
现在有个朋友想买把DA/SA的枪,预算不高,我推荐CZ75,正好他也喜欢CZ75,正好。
我自己也顺便研究一下。我不喜欢全尺寸的CZ75,compact的还好,所以看得上的,主
要就是PCR和P01了。两者区别不大,主要是照门,导轨略有区别。从照片上看,我觉得
P01 更好看一些。
CZ的价格便宜,比Sig便宜多了,用起来,似乎也没发现有什么不好的。那么CZ相比Sig
,差在什么方面的?CZ才表面做工看起来比Sig(普通型的P226为例,什么Mk5之类的高
级货例外)要细腻,扳机比起Sig引以为豪的扳机也没觉得差多少。那么CZ到底插在哪
里呢?
似乎有... 阅读全帖
B********g
发帖数: 2814
27
http://www.imfdb.org/wiki/Mission:_Impossible_-_Ghost_Protocol
这是列表,链接里有图片
Contents
[hide]
1 Handguns
1.1 SIG-Sauer P226 E2
1.2 SIG-Sauer P226 SCT
1.3 SIG-Sauer P229R
1.4 Beretta 92FS
1.5 Beretta Cougar
1.6 Desert Eagle Mark XIX (Modified)
1.7 Glock 17
1.8 Glock Pistol (Modified)
1.9 Heckler & Koch USP Compact
1.10 Heckler & Koch P7
1.11 Makarov PM
1.12 Stechkin APS
2 Submachine Guns
2... 阅读全帖
j***n
发帖数: 3786
28
来自主题: GunsAndGears版 - Sig 55x
上周打了Sig 556R,这周打了Sig 556和551,总共打了差不多1000发左右,各种牌子的铜
壳钢壳弹,完全无压力.然后朋友把枪打开擦了一下,我仔细看了一下内部构造,感觉就是
一个改进的AK结构,但是精度不俗.今天用Sig 556在100码上连续4次5发散步在2"以内.
班上在考虑买AK的同学可以考虑一下Sig 55x系列,都可以打钢壳单,价格在$1k上下,还
是很合理的.但是扳机和做工比AK上了一步,缺点是整枪比AR重不少.在自由州的同学,可
以上Sig 556 10" SBR,后托可折叠,放在背包里刚好
w***z
发帖数: 398
29
来自主题: GunsAndGears版 - Sig 556 side fold $996是不是好deal?
There seem to be quite a few Sig rifle deals now days, does anyone know
which one would be a better deal? They all seem to be fairly priced,
comparing to the expensive AR15 now days.
http://www.slickguns.com/product/sig-sauer-p55610bsmr-p556-stan
http://www.slickguns.com/product/sig-sauer-r55616bcrd-556-semi-
http://www.slickguns.com/product/sig-sauer-r551-semi-automatic-
http://www.slickguns.com/product/sig-sauer-716-patrol-308-win-1
a****m
发帖数: 83
30
我们这里的local枪店这个星期推出Sig Sauer Day,有两款Sig p556 with pistol
stabilizer brace.
一款是Sig p556 SWAT Chambered in 5.56, 10.5"Barrel, Quad Rail with Pistol
Stabilizer Brace. No Class III or NFA tax stamp required comes with letter
from ATF, Price @ $1249.99
另一款是Sig p556 Classic Chambered in 5.56, 10.5"Barrel, with Pistol
Stabilizer Brace. No Class III or NFA tax stamp required comes with letter
from ATF, Price @ $1139.99
http://www.sigsauer.com/CatalogProductDetails/p556-classic-pist
请问这两款Sig p556 这个价位如何?算... 阅读全帖
z*****z
发帖数: 2438
31
来自主题: GunsAndGears版 - 初次试枪 Sig P229
根风买了Sig P229. 今天试枪,感觉有些失望。
这是我第二把9mm,有一把CZ75 不锈钢版。
没和别的比较过,就和CZ75比吧。貌似没有CZ准。我是打50yard 10"铁靶,所以谈不上
分布。CZ大概10发7-8中,Sig 4-5中。也可能和新枪不适应有关。Sig准星貌似比CZ看
的清除,但就是不上靶。
由于Sig轻,后坐力大很多,这也在预料之中。CZ打着真舒服,感觉是在推手,很柔和。
Sig最不爽就是向后抛弹壳,经常砸到我,打到最后都有心理阴影了,总想躲。
w*******y
发帖数: 60932
32
The SIG SAUERSP2022is the latest version of our popular polymer framed
pistol and features a durable, lightweight and wear-resistant polymer frame
with the added tactical versatility of an integrated accessory rail. The
slide is machined from a solid block of stainless steel and protected by
SIGs black Nitronfinish. Available in 9mm, .357 SIG and .40 S&W, the
SP2022 can easily be converted from a Double-Action/Single-Action to a
Double-Action Only configuration through a unique integral fire con... 阅读全帖
s********a
发帖数: 1680
33
用usps priority+sig confirmation寄的,现在病人chargeback,tracking已经显示
delivered with sig,但是request sig,usps发来的pdf上却说There is no delivery
signature on file for this item. 这个能找usps索赔吗
D******r
发帖数: 491
34
来自主题: GunsAndGears版 - Sig P220 carry elite
there is a long thread on sig forum regarding recent sig qualities, the
consensus is that it is going down.
The gun dealer, who actually specialized in sig, says he used to send 5-6
sigs back to manufacturer in a year, now he send that much back in a month.
He claims himself has gone complete Glock and HK, though himself used to be
a huge fan of 220st
If you want a .45, and can't live with Glock's grip, I suggest you take a
look at HK45 or HK45c, HK claims they are the new 1911 of the 21st cen
p***e
发帖数: 29053
35
来自主题: GunsAndGears版 - SIG MOSQUITO .22 个人使用感觉
本人完全是新手,上个星期首次受朋友邀请打了70发 9MM的clockxx,本着子弹便宜,
枪便宜和老
婆可以用的原则,第2天买了个SIG MOSQUITO .22.
今天去靶场打了300多rounds,得出以下菜鸟评测以供菜鸟参考。
网络考古,sig是好brand,但是SIG MOSQUITO soso。而且.22有卡子弹的问题,
300round的试验结果完全属实。
枪的价格: SIG MOSQUITO academy: $299, 它的主要竞争对手 walther P22卖 $399
子弹价格: CCI 7 CENTS 一颗子弹, walmart 杂牌子弹竟然只要2.7cents, OMG!!!
卡子弹问题: 我打了30 round CCI,没有一个卡弹。 打了300 rounds 的walmart的杂
牌子弹 卡弹率为15%左右,通常是第2发卡。这和网络上说的查不多,网上说.22的枪最好用
CCI牌子的子弹防止卡弹。 不过walmart的子弹实在太便宜了!还有卡弹和射击习惯有关,好像射
击速度比较慢,卡弹几率高很多。我朋友打惯9mm,慢慢瞄准,慢慢扣扳机,打MOSQUITO基本
z****t
发帖数: 37
36
来自主题: GunsAndGears版 - which to buy: cz75/glock/fnp/sig sp2022?
cz75 和 glock 都很好,很准,容易控制
fnp9 没用过,不是很感冒,据说是sig for the poor, 不如直接上sig,
fnp45好像很不错,有特点,14发的弹夹而且握把不大,最大容量的.45了
sig sp2022还是那句话,不如直接上sig p226/229,半吊子货,缺乏特色
另外glock也推荐大口径的,比9mm的好玩
f*********n
发帖数: 11154
37
来自主题: GunsAndGears版 - 有人玩过SIG的1911吗?
这是我在handgun magazine上看到的一篇评论:
http://handgunsmag.com/featured_handguns/HG_sigsauer1911TTT_200903/
One .45 I especially like is the Sig Sauer Model 1911 TTT. I'm a big fan of
guns with spit and polish that still retain the classic look of the original
, which the TTT does in spades. It boasts a two-tone stainless matte finish
with a Nitron-finished slide over a natural stainless frame. Grips are
figured burl maple.
The TTT has the traditional lines of most 1911s but includes enhanced safety
featu... 阅读全帖
L********1
发帖数: 710
38

没人说那我来说一说吧。首先,选枪和选女人很象,萝卜青菜。其次,以下仅针对德产
老SIG。
1. 全金属Full Size,但同时又不象92FS那么大而重,必要时揣身上完全可以承受。
2. 算是手枪中的一个经典设计,被各地军警广泛采用,Track Record很好。
3. 德国产的老SIG P226质量上乘,Sig到现在为止都没吃完的老本,主要靠的就是那些
老P226。
4. 老P226平衡感非常好,握着很称手。
5. SIG的扳机在自动手枪中是上乘的,smooth & crisp。
6. 和另一大众选择Glock比起来,新枪是八九百和五六百的差别,但九成新的二手货,
就可以是五百和三四百的差别,你不会觉得太贵。
欢迎补充。
b*****e
发帖数: 5133
39
来自主题: GunsAndGears版 - CZ75比Sig差在哪里?
更喜欢SIG的是不是“宁要资本主义的草,不要社会主义的苗”啊?
CZ75的经典外形我也有点怪怪的感觉,主要是扳机护圈下面弧度太大却又不宽和握把外
形及长度与枪的比例和其它枪比有点与众不同吧。地包天的套筒是难改了,方扳机护圈
或者扳机护圈底部是平的,就像baby desert eagle那样外形会好些。山寨CZ75的
Sphinx, Tanfoglio(EAA Witness)枪也看上去不错。HK的枪是实物比照片要好不少。
SIG枪照片和实物感觉差不多。
SIG瑞士德国的血统,就是成本一样也要比东欧枪多卖两钱。另外现在的价钱还是受最
初上市定位和定价影响的。SIG的塑料枪价格和CZ的就差很少了。
s**o
发帖数: 340
40
来自主题: GunsAndGears版 - CZ75比Sig差在哪里?
便宜没好货,东欧造的东西非常糙,所以会有CZ弯套筒,扳机弹簧打着打着断掉这样的
事件

Sig
,差在什么方面的?CZ才表面做工看起来比Sig(普通型的P226为例,什么Mk5之类的高
级货例外)要细腻,扳机比起Sig引以为豪的扳机也没觉得差多少。那么CZ到底插在哪
里呢?
似乎有人说过Sig的材料比CZ的好,不知道是否真的如此。
H****r
发帖数: 16240
41
来自主题: GunsAndGears版 - (zz)SIG SAUER Custom Shop Tune-up, $99
This Father’s Day... Treat yourself or your father to a SIG SAUER? Custom
Shop Tune-up!
Our Most Popular Custom Shop Service is now OVER 30% OFF! Get the SIG
Service Package for your SIG SAUER Pistol for only...$99.95
(normally $144.95) Plus Shipping & Handling
- Complete disassembly and ultrasonic cleaning
- Replacement of commonly worn springs and pins
- Thorough inspection of entire firearm
- Replacement of sights with new Meprolight? Night Sights
- Complete lubrication and assembly to factor... 阅读全帖
h*********r
发帖数: 1943
42
来自主题: GunsAndGears版 - 活塞AR? HK vs Sig? Sig 556 vs 516 ?
556是个仓促上马的阉货嫁接工程,最著名的就是产品质量低下。今年Sig在原版真正
550系列的基础上推出的551A1,情况可能会略好一点,不过比起原版,551A1从机匣用
料上就差距很大,原版的是钢机匣,A1是铝机匣。所以能不能和原版一样打精度很让人
怀疑,看了几个杂志的测评,没有用赛弹百码就是一两MOA的样子,但因为没有用赛弹
,也不知道是谁打的,所以我看到的这些数据都没用。
长短行程活塞的区别在于活塞/活塞杆是不是整个和Bolt Carrier连在一起,不连着的
比如VZ,SKS就是短行程,活塞往后面短暂的一顶就停,连着的AK、SG55X系列和ARX就
是长行程(活塞腔膨胀到整弹长以上),还有活塞杆很短,几乎连着的,因为活塞活动
空间不大,所以也是短行程
516是Sig狠推的短行程活塞AR系列,我觉得516和716的扳机非常好,除了PreTravel有
点垃圾之外几乎可以和Timmeny之类的东西相提并论,机加工比起同价位或者更高价位
段中高端的成品AR品牌比如RRA或者Colt更好一些。市场定位应该是NIB 导轨型号1200
左右,非导轨型号1000以下,导轨还有附带的红点,说实... 阅读全帖
h*********2
发帖数: 2508
43
来自主题: GunsAndGears版 - 活塞AR? HK vs Sig? Sig 556 vs 516 ?
还木顾上打呢,买完先回国现在又出差,回去第一件事是去打516.
俺比较喜欢吃螃蟹,看一些对Sig比较苛刻的老外对516都很推崇,于是也木多想就进了
一只。有把Sig步枪收全了的说516是用过最好使的Sig 5.56. 要是自己DIY我想不会有
原厂的匹配程度好
扳机如版主所说,手感很好,于是dry-fire了许多
c*****y
发帖数: 5747
44
呵呵,最近是咋了,
新枪好像不论啥牌子都是发发卡,那么严重的话,就是枪的问题。
我SIG 没少玩,不同型号都有。
记忆里没怎么卡过。
不过新枪紧,偶尔卡一两发誓正常的。
你彻底清洁一遍枪,有时候那种厚实的保护油也是卡的原因。
然后按照网上的方法正确的给枪上油再试试。
下次换个别的牌子的子弹,比如PMC
如果还卡,就是枪有问题。
找SIG 工厂了。
还有问题,
卖给我!
只要是SIG 不锈钢版,我都接着了!
呵呵!
俺就是狂顶SIG 啊!
c*****y
发帖数: 5747
45
呵呵,最近是咋了,
新枪好像不论啥牌子都是发发卡,那么严重的话,就是枪的问题。
我SIG 没少玩,不同型号都有。
记忆里没怎么卡过。
不过新枪紧,偶尔卡一两发誓正常的。
你彻底清洁一遍枪,有时候那种厚实的保护油也是卡的原因。
然后按照网上的方法正确的给枪上油再试试。
下次换个别的牌子的子弹,比如PMC
如果还卡,就是枪有问题。
找SIG 工厂了。
还有问题,
卖给我!
只要是SIG 不锈钢版,我都接着了!
呵呵!
俺就是狂顶SIG 啊!
J**********r
发帖数: 128
46
来自主题: GunsAndGears版 - 入了SIG P226 海军版MK25
网上的一些评论:
An alloy frame P226 should be good for at least 60,000 rounds and many have
been documented to go well over 100,000 rounds. Of course recoil springs
need to be changed on schedule (3000-5000 rounds) and the frame rails need
to be kept well lubed and many use grease for high volume shooting.
Poly frame pistols have steel inserts in the frame for the steel slide to
ride on which certainly have a potential for a very long life that may well
exceed that of an alloy frame P226 including SIGs... 阅读全帖
P*****J
发帖数: 1745
47
来自主题: GunsAndGears版 - 请教sig p226 stainless 问题
我在别的论坛上看到过这种说法。不锈钢的枪身由于质量大,在后坐过程中位移比铝合
金枪身小,所以套筒对take down lever的冲击也就相对大一些。不过我认为这个说法
和铝合金枪身磨损、CZ弯套筒一样,都是轶事性质的,不值得作为选枪的主要依据。你
看看下面的这个SIG维护表,take down lever是建议每两万发一换的。你要不放心,一
万发一换就行了。一万发子弹也至少两千块钱了,花30块钱换个零件没啥大不了的。
http://sigforum.com/eve/forums/a/tpc/f/150601935/m/6801056451
The following is SIG SAUER's current parts replacement schedule (numbers of
rounds), with some comments of my own:
Barrel: If the pistol exhibits keyholing or unacceptable accuracy.
Decocking lever spring: 10,000
Extractor: 20... 阅读全帖
h*********2
发帖数: 2508
48
这个比较给力:
When SIG brought out the 516, which is a direct, product-improved copy of
the HK416 (made by some of the same people) the M4 Industry nearly blew its
colon right out of the seat of its multicam BDUs. One company sued SIG. M4
dedicated forums began lambasting SIG for theft, un-American behavior and
even witchcraft. And the M4 industry coupled with the AK industry worked
hard to rally its customers, and yes…its followers to burn SIG at the stake
….and all its rifles too.
‘unAmerican behavi... 阅读全帖
f********e
发帖数: 325
w*****o
发帖数: 1806
50
咋没人说起过?如果考虑sig 1911, 那这个deal unbeatable哈。
http://www.sportsmansoutdoorsuperstore.com/products2.cfm/ID/110
顺便冒个想法,似乎感觉本版玩的小众点,比如对sig情有独锺,外面来说,还是S&W,
colt啦支持者更多吧。sig算外来品牌,爱1911的patroit们可能不玩sig的。
1 2 3 4 5 6 7 8 9 10 下页 末页 (共10页)