由买买提看人间百态

topics

全部话题 - 话题: scope
首页 上页 1 2 3 4 5 6 7 8 9 10 下页 末页 (共10页)
H****r
发帖数: 16240
1
来自主题: GunsAndGears版 - 推荐个scope吧。。。
对,他装得比较高,而且左偏
你要是左撇子就不适用
是QD的,装回去……在AK精度内不用重新校:)
而且也用不着拆啊,反正拆枪的时候影响不到这个镜子
这网站还行,或者有个加拿大网站:
http://www.eastwave.ca/products/scopes/posp4x24v.html
总之现在6x24的,好像7.62x39弹道分化的都没了,
都是那种7.62x54r的千米分划,
而且你也不要买6x42或者8x42的镜子,AK太短,装上去头重脚轻不协调。
好像按你预算,所有posp镜子就前面贴的那一款合适了

cover?
t******8
发帖数: 2803
2
来自主题: GunsAndGears版 - 推荐个scope吧。。。
刚下了订单,谢谢你了!

4x24-w-black-finish-400-meter-rangefinder-rifle-scope-ak-version.html
t******8
发帖数: 2803
3
装上Scope以后贴腮好困难,如果没有cheek weld的话,非常不符合Appleseed
的教导。。。所以想找一个给AK原版枪托设计的cheek raiser。不知道有没有?
c**********d
发帖数: 2428
4
来自主题: GunsAndGears版 - 哪位大師能科普一下scope嗎?
买SCOPE的大拇指定律是买你能负担得起的最贵的。另一个定律是镜子的钱不能低于枪
的钱。
Buy cheap, buy twice.
M*******n
发帖数: 1165
5
来自主题: GunsAndGears版 - 今天看到一个SCAR上装‘Dual Scope’
靶场一大叔的SCAR上装了两个scope,前面是Eotech Holo sight,后面是Eotech的
magnifier,我还是第一次看到这样子装的镜子
没有照相网上找了图,就像图里的差不多,可以拨开,感觉非常实用,CQC和中距离都
有了,就是估计不禁摔
A*****i
发帖数: 465
6
来自主题: GunsAndGears版 - AR 15 装Scope的问题
Burris还是物有所值的.
我目前用的是这个:http://www.amazon.com/gp/product/B003NZ9W9E
不知道为什么,100yard这个mount配合Vortex Viper 3x7 我的成绩还不如铁瞄,很悲
催。。。
用scope大概散步在6”左右,铁瞄在4“上下,我估计我可能mount装得不太好,反正我
这里结果不是太好所以不好推荐你上同样的。Burris是被考验过的,有米就上。
f********t
发帖数: 4574
7
来自主题: GunsAndGears版 - 如何知道枪上的scope base是多少moa的
买枪带的scope base,没说多少moa,暂时没法去靶场,在家里有没有办法可以量/看出
来?
h******d
发帖数: 4761
8
Nitrex TR One 3-10x50mm Rifle Scope 没有开包:
http://www.natchezss.com/product.cfm?contentID=productDetail&pr
求换 marlin 795 上能用的小镜子和环或是其它配件,或是.308 的子弹。
PM联系。
仅限南北加州。
本周末在北加州。
常驻南加。
谢谢!
j*****g
发帖数: 223
9
10lbs, 11, 12?
俺的加上scope/bipod 有12.5lb! 背在身上倒是不觉得,不知道野外行不行
j*****g
发帖数: 223
10
308 8磅会不会太轻,recoil太厉害?
scope bipod 才1磅多?有没有12x?
j***n
发帖数: 3786
11
来自主题: GunsAndGears版 - WTS: POSP 4x24 Scope with MOLOT mount
POSP 4x24 Rifle Scope w/ 400 Meter Rangefinder, SVD/SKS Version. It can be
mounted on the SKS, SVD, Mosin and Mauser with the MOLOT receiver mount.
当年$300多刀买的,我在calgun上卖$250,在这里就算$200刀啦,要给RPK买新镜子,lol~~~
A*****i
发帖数: 465
12
来自主题: GunsAndGears版 - WTS: POSP 4x24 Scope with MOLOT mount
哇,枪老板一出手就是好货好价啊!!!
可惜我目前还没有装得上这个的家伙,也没打算给SKS装Scope.
如果不用MOLOT mount, 光是右边的镜子和架子就可以直接装到Saiga/AK系列上面的侧
轨吧?
s*******n
发帖数: 12995
13
还好呀,就算讲到1500,也只便宜400而已呀。
还有要再买他的Nikon 4-16 power 50mm BDC scope,多少钱合适?
x*7
发帖数: 11281
14
镜子可以看看这个,灰狼用在AK74上的
http://www.amazon.com/4X32-Range-Estimating-Mil-Dot-Scope/dp/B0
镜环推荐这个,可以补偿机匣的偏转
在网上看到,好像有人的MARLIN 795机匣有点偏。
http://www.amazon.com/Millett-Angle-Loc-Windage-Adjustable-1-In
r*****7
发帖数: 574
15
我直接出价到$100 不知道各位觉得这个Red Dot多少钱合适啊? 谢谢
链接如下:
http://www.ebay.com/itm/AK-Kobra-Side-Mount-Red-Dot-Scope-/1306
对这镜子不熟悉 不知道哪位仁兄有用过?
f*********n
发帖数: 11154
16
来自主题: GunsAndGears版 - 3/8 dove tail scope ring?
我用的是B Square air rifle ring,还不错
http://www.amazon.com/s/?ie=UTF8&keywords=3%2F8+scope+rings&tag
x*7
发帖数: 11281
17
来自主题: GunsAndGears版 - 3/8 dove tail scope ring?
happydad当初给他的marlin 795买环的时候,
我研究的结果是这个不错,
millet angle loc 1 inch
http://swfa.com/Millett-22-Caliber-Scope-1-Rings-P9426.aspx
好处是左右调节方便,有时候receiver上的槽如果没有开正
这个可以稍微调节到和枪管平行
x*7
发帖数: 11281
18
http://media.midwayusa.com/pdf/Coupons/nikon-rimfire-rebate.pdf
NIKON
6725
6718
6734
那个 6718
nikon 4x32 rimfire scope
rebate以后只要一半价钱,合算的
从马鬃上定了一个,free shpping
x*7
发帖数: 11281
19
来自主题: GunsAndGears版 - 有人知道这个牌子的scope吗?
http://www.opticstalk.com/swfa-scope-scale-discussion-thread-20
2009 Riflescope Rating Scale
Leica ER, Swarovski Z6, Zeiss Victory
Kahles C - CL & CSX, Premier Reticle, Schmidt & Bender
Kahles KX, U.S. Optics, Swarovski PH & American Lightweight
Bushnell Elite 6500, Leupold VX-7, Nightforce NXS, IOR Valdada, Vortex Razor
Bushnell Elite 4200, Leupold VX-3, Nikon Monarch & Monarch X, Zeiss Conquest
Leupold Mark 4 VX III & VX-L, Meopta, Nikon Monarch Gold & Titanium,
Sightron SIII & S2 Big Sky, Vor... 阅读全帖
N*********r
发帖数: 1190
20
来自主题: GunsAndGears版 - 求推荐Sluggun的Scope Mount Ring
1. 价格太便宜了
2. 质量太cheap了
3. 牌子没听说过
4. 什么材料都不说
5. 要是铝的,螺丝太少了,不结实
6. 你的管要是cantilever的话,没有sights, 要see thru做甚
7. 太高了,腮帮贴墙托,眼睛肯定看不到,不在scope的光学轴线上
8. 谁都可以装上,但新手装得好的可能性很小。
需要考虑:
1. 选择合适高度的镜环,这样眼睛才能在光学轴线上,不用抬头也不用低头翻眼。
2. mount在合适的水平位置上,使得eye relief正好,自然姿势看到境内视野全亮。
3. clean ring, mounting base, no oil
4. 螺丝上blue loctite
5. 确保镜子的reticle是和枪横平竖直的,需要用小的level,当然了,可别上反了
6. 所有螺丝torque上得均匀,合适,不松不紧。而且要一起,渐进。
x*7
发帖数: 11281
21
来自主题: GunsAndGears版 - 本版好像Hetzer有名贵spotting scope的
上次,野地里,看了一个NIKON的spotting scope
下定决心,以后买欧洲的
s********y
发帖数: 769
22
A mint condition CZ452 Ultra Lux with Scope for sale.
I've had about 5-600 rounds through it, very well maintained.
I will also throw in (1) a rifle bag, (2) a snake barrel cleaner and (3)
over 1000 rds of .22LR ammo, which includes about 500rds of Wolf MT.
Please make an offer.
I bought this rifle last summer, but didn't find a lot of opportunities to
shoot, and that's why I decide to let go... It's a very very accurate rifle,
very well made as well.
s********y
发帖数: 769
23
其实我心里也没有最后决定要不要卖。希望我将来不会后悔。那的确是好枪。
买了后没打过几次,另外除了枪,还有快装卸的ring,scope,子弹,枪套,外加擦枪管用
的 boresnake 不知道开价450刀合适不?
j***n
发帖数: 3786
24
来自主题: GunsAndGears版 - 玩过NF scope的大拿们请进。
how many oz? it should be 34oz
i have both compact and F1. nice scopes...
h*******x
发帖数: 347
25
来自主题: GunsAndGears版 - $35 spotting scope in frys
http://www.frys.com/product/7164382?site=sa:adpages page:Fri_p17 date:072012
Firefield FF11017K - 20-60x60SE Spotting Scope Kit
这周的广告。原价60。全塑料,找不到有意义的REVIEW。Kunming Dewei Optical。
OVERSTOCK象是也有。
h*******x
发帖数: 347
26
来自主题: GunsAndGears版 - $35 spotting scope in frys
FOV: 110-57 ft at 1000 yard. or 2 (20X) - 1(60X) degree. very narrow but
common on zoom spotting scope.
C*******r
发帖数: 10345
27
上次Hetzer推荐了Pentax,恰好adorama最近降价,俺就觉得进一个试试
http://www.adorama.com/PXSS65ED2.html
只买了body,因为Pentax可以用天文望远镜的eyepiece,俺恰好有个Orion的 Epic 2
ed eyepiece,决定试试看。
http://www.telescope.com/Accessories/Sale-Accessories/Sale-Tele
就用这个eyepiece,相当于26X固定倍率的scope,去rifle club观了一通。效果还是很
不错的,200码.223的弹洞(普通黑色靶)可以轻而易举的看见。
Pentax这个让用别家的eyepiece,确实是经济的选择。
M*******y
发帖数: 263
28
来自主题: GunsAndGears版 - does this AR 15 scope look right?
already got a 308, thinking about getting first 223 ar15.
will the fixed front sight interfere with the scope?
c**********d
发帖数: 2428
29
来自主题: GunsAndGears版 - does this AR 15 scope look right?
3-9X42? It is usable, but not a cabin scope in my opinion.
S**********s
发帖数: 4534
30
来自主题: GunsAndGears版 - does this AR 15 scope look right?
If you mount the scope more forward for the right eye relief, you can go NTC
(Nose to charging handle).
M*******y
发帖数: 263
31
来自主题: GunsAndGears版 - dual scope mount for AR?
在我的AR上装了3-9的scope
然后准备买个下面这个offset mount,然后装个1x的red dot
http://www.ebay.com/itm/Tactical-45-degree-Angle-Offset-Side-Ra
版上大牛们看看这个offset mount够用吗?
S**********s
发帖数: 4534
32
来自主题: GunsAndGears版 - dual scope mount for AR?
我记得你那支dpms的top rail很短,装 scope以后 能有地方装它么
H****r
发帖数: 16240
33
才59块钱
去搞一个吧
但镜子要找比较靠谱一点的
视频里的有点像Weaver 2.5-8x28 Classic Handgun Scope
能变倍的手枪镜都不便宜
burris、leupold、nikon这些都行
最便宜的可能是Weaver 1.5-4x20 Classic Handgun
千万不要买bsa、NcStar或者UTG等等的
又,变倍手枪镜在高倍率非常非常痛苦,eye box超级小
要我说,配一个4倍定倍手枪镜就行了,还可以省很多钱。
S**********s
发帖数: 4534
34
如果要轻便, Leupold有个scout scope, 2.5x28mm, 不到半磅。
价格有点贵, 2-300?
leatherwood有个2-7x32, 大概是一半的价格, 也重了一倍。
s**o
发帖数: 340
35
来自主题: GunsAndGears版 - I approve the Bushnell Elite scope!
我如果不说这个镜子光学不好,只说它值一百刀,不会引起口水仗,但是别人也看不明
白为什么。
找到一个阅镜无数的老枪棍的review,看看就心里有数了
http://www.opticstalk.com/inexpensive-scope-comparison_topic211
s**o
发帖数: 340
36
来自主题: GunsAndGears版 - I approve the Bushnell Elite scope!
我如果不说这个镜子光学不好,只说它值一百刀,不会引起口水仗,但是别人也看不明
白为什么。
找到一个阅镜无数的老枪棍的review,看看就心里有数了
http://www.opticstalk.com/inexpensive-scope-comparison_topic211
J*****L
发帖数: 278
37
来自主题: GunsAndGears版 - 问一下大家scope和red dot有什么区别么
Thanks for the heads-up. The deal is alive now. I have just placed an order
for one. $340 is a good price on this red dot...Still working on piecing
together an AR for me so for now the scope will be sitting one my crosman
air pistol, lol.
d*******s
发帖数: 15155
38
来自主题: GunsAndGears版 - 问一下大家scope和red dot有什么区别么
man, u r evil...
It seems out of stock, tho.
What do you think about a open sight red dot? I want a small dot to put on
top of my scope.

review
)
k*******n
发帖数: 5546
39
我承认我是枪打得烂还喜欢tactical cool的mall ninja,大家鄙视我吧。
在钱包能允许得条件下,特好但特贵的念叨也白念叨,圣诞老人听不见。
14.5寸及以下:
--Aimpoint T1/H1
16寸两种选择:
--Burris Mtac 1-4x 带Cat Tail + LaRue/ADM mount+15度铁瞄
--Aimpoint M4s + 3x
18寸/20寸
--NIGHTFORCE 2.5-10X24 NXS +LaRue SPR SCOPE MOUNT
H****r
发帖数: 16240
40
http://www.leupold.com/tactical/scopes/mark-4-hamr-riflescopes/
HAMR是放在上面了。
红点放下面,影响视场吧?
不过对AR而言,倍率镜在上面倒真是高度合适了。
c**********d
发帖数: 2428
41
这个想法已经不新了,类似的设计在G36上已经用了,只是下面那个不是红点而已。这
个设计的一个固有缺陷就是两个瞄的瞄准基线不同轴,对贴腮会有影响,进而影响精度。
看了各位弟兄的想法,感觉提的条件都很苛刻啊。有的是完全矛盾的。不过我很喜欢这
样的挑战。
我也说说我的想法吧。我个人觉得1X+xX是方向。x可以在4到6之间。我自己打猎用的3-
9X,中间的倍率完全不用。转换的时候虽然不能说难但总是觉得太慢,动作太多,而且
影响射击的连贯性。
至于军用的,考虑阿富汗战场的特征,士兵在战场寻找目标的时候会希望用大视场无视
差的1X,如果对某一处感觉有威胁,就快速放大求证。一但确认立即开火。如果证明没
有威胁,则立即换回1X继续搜索。如果还是用的ZOOM SCOPE的设计,在拧倍率调节圈的
时候就可能失去目标。即使是ELCAM的设计好像也不能完全避免这一点。当然这东西我
还没有摸过,所以不确定。这东西想想容易,真要实现还是很难的。
c**m
发帖数: 404
p*****n
发帖数: 294
43
来自主题: GunsAndGears版 - Tikka T3 lite 30-06 scope rings
配Pentax 4-16x50 scope, 原装的rings不够高,有没有哪位知道什么rings合适?
h*********r
发帖数: 1943
44
来自主题: GunsAndGears版 - 问一个zero scope的问题
50yd做好了归零,一百码只要瞄上去或者调上去一些就能命中,机械精度不受scope影响
d**********g
发帖数: 2014
45
来自主题: GunsAndGears版 - SKS scope mount,
ncstar那个
http://www.amazon.com/NcStar-Receiver-Tri-Rail-Weaver-MTSKS/dp/
确实不行,气死我了,浪费了1小时打磨。前面尺寸不对我是意料之中也理解的,没想
到后面洞也太小。
而且就算装好,也很难守住0.
前几天几位老大说我,我还不信,这下子心服口服了。
那么请教各位老大,怎么drill tap?
什么是最不坏的sks scope mount办法?
谢谢。
d**********g
发帖数: 2014
46
来自主题: GunsAndGears版 - cabelas nikon scope sale
many model Prostaff $50 off
Buckmaster $50 off
Monarch $100 off.
I am trying to get one for target and hunting for my HOWA 1500 30-06.
So probably around 4-12x40mm.
I already have a 3-9x50mm.
Can't decide which one to go. I like the buckmaster but can't tell how much
it is better than the prostaff, also if I should just go get Monarch.
Any advise?
http://www.cabelas.com/product/Nikon-ProStaff-Riflescope/121365
http://www.cabelas.com/product/Nikon-Monarch174-Scope/748462.ut
Monarch and buckmaster... 阅读全帖
d**********g
发帖数: 2014
47
来自主题: GunsAndGears版 - cabelas nikon scope sale
谢谢,很久很久以前用过pentax相机,印象中质量极好。
呵呵。那就只考虑nikon了。
为什么canon不生产scope,我用canon相机。印象比nikon好。
F*****t
发帖数: 1138
48
来自主题: GunsAndGears版 - CZ4555 Lux Scope Setup
是不一样的,但bkl这款scope mount是两边同时收缩压紧,号称中心不变。俺在网上看
也有不少人用这个,拿到手看做工也不错。
r*******0
发帖数: 706
49
来自主题: GunsAndGears版 - 请教枪友们,这种scope reticle怎么样
Primary Arms 6X Scope with our Patent Pending ACSS Reticle "Advanced
Combined Sighting System"
https://www.primaryarms.com/Primary_Arms_6X_Scope_with_ACSS_reticle_p/
pa6xrbd.htm
http://www.youtube.com/watch?v=nxwaiDeXP8c&feature=youtu.be&utm
r*******0
发帖数: 706
50
来自主题: GunsAndGears版 - 请教枪友们,这种scope reticle怎么样
我有他的3xMagnifier,本来想买6x Magnifier
觉得这个6x scope 也不错 也不贵$180
首页 上页 1 2 3 4 5 6 7 8 9 10 下页 末页 (共10页)