x****5
发帖数: 1564 | 1 Mp4 看起来真是pure beauty，很酷的刀背。奇怪的是mizuno以前出的好几套杆和新出
的杆价格竟然一样，不降价，都是999。mizuno还真有个性，想买降价的旧款都没有。
下次试试mp60。
Ap1和ap2看着不象刀背，不够酷。
全。 |
|
g******3
发帖数: 24 | 2 歪哥看来是同道中人啊。MP4和老虎的vr blade都是我最爱，从上面看下去就一个字：
薄。
Mp4 看起来真是pure beauty，很酷的刀背。奇怪的是mizuno以前出的好几套杆和新出
的杆价格竟然一样，不降价，都是999。mizuno还真有个性，想买降价的旧款都没.....
... |
|
v****e
发帖数: 19471 | 3 MP4这种虽然很美，但对不是单差的选手来讲太难打了。cut muscle好很多，比如MP 60
, 57, 和现在的64
.. |
|
v****e
发帖数: 19471 | 4 其实MP没有一款适合handicap 12以上的（他们另有个线叫JPX是给菜鸟的）。但话说回
来，以前每个打球的人都是用blade学出来的。
. |
|
|
t******e
发帖数: 2009 | 6 我就知道版上肯定有对mizuno如数家珍的人物！
. |
|
c**********e
发帖数: 276 | 7 就冲你对高尔夫的激情,就应该买一套! 客观来讲, 暂时对于提高成绩不会有立竿见影
的功效,但是,铁杆是保证成绩最重要的杆, 看得舒服,用的舒服,不远的将来,你就加入
本版单差高手之列啦! |
|
x****5
发帖数: 1564 | 8 真是长见识，不过话说mizuno这些系列起名真是够绕的，数字也没有规律，难得你能把
它捋得这么清楚。
Fourteen这个牌子没听说过，也不知哪里有卖。
. |
|
t******e
发帖数: 2009 | 9 保证成绩最重要的杆难道不是推杆么？
推杆的水可以说是深不可测啊。 |
|
j******e
发帖数: 1424 | 10 Mizuno MPxx 我也很疑惑这点， 这数字是怎么来的。
Fourteen 有的 driving range 经常有demo |
|
|
|
x****5
发帖数: 1564 | 13 我还真是孤陋寡闻，几乎都没听说过
我还以为最高级的就是Scotty Cameron |
|
t******e
发帖数: 2009 | 14 你这是故意在黑scotty cameron，真要说高端，很多牌子都不如SC。
我觉得putter就是一个被高估的东西，我有一根SC newport2，一根bettinardi BB50，
一根PING PAL5，一根tour edge不知道啥型号的，忘记了。样式不同用起来当然有区别
，但是杆头质量上还真没体会出有啥不同。 |
|
c**********e
发帖数: 276 | 15 推杆固然重要，我认为达到平均每洞两杆成绩并且保持应该是最容易做到的。推杆动作
等相对比较单一，变量数目少。然而，想降低到一场球30刚出头或更低的推球，除推杆
技术本身要上一个台阶，也需要好的铁杆做保证。
一场球，除推杆外，用铁杆的机会最多（混合替代长铁的话），而且所应用的场合最多
变--各种的lie,各种线路和距离，因此我认为铁杆是成绩稳定的关键。
初学的人，铁杆基本过关，基本上可以比较轻易打到90多的水平。 稍微精细一些，可
以保证方向和距离，80多是比较容易。
再好的成绩，任何一个方面就都不能拉下。需要好好下功夫。我认为即使达到70多的水
平，要保持也不容易。 |
|
t******e
发帖数: 2009 | 16 我也来介绍一个小众putter，小得不能再小，骚得不能再骚，deal好得不能再好。
Bruce Sizemore 和super stroke 在2011年底开始合作生产了DCF系列的putter。
外观非常亮骚，尤其是配上了亮银色的super stroke的grip之后，简直亮得不能再亮了。
也许太亮骚了，所以受到了广大质朴的美国人民的唾弃，并没有取得很大的成功，
原价350的杆子现在在ebay只要75就能买到。
2012年底，super stroke宣布彻底退出putter市场，只生产grip。可惜啊。
如果不是因为我已经有了太多的putter，肯定要入手一只。 |
|
|
t*******t
发帖数: 1656 | 18 70 多太难了。
我即使偶尔达到也肯定保持不了。
这辈子就满足于bogey 水平，容易场子80多，难场子争取破百。
这么一想我就不再升级装备，省大笔银子。嘿嘿。 |
|
c**********e
发帖数: 276 | 19 我也觉得sc的推杆就很好了。买的第一根杆是never compromise 的，刚学的时候进的
，记得新的就50刀。 用了一年多点，换成sc的，相比较而言，用sc的这根杆，推球接
触球的时候，感觉杆头与球之间的接触偏软，好像存在一点小小的弹性。我很喜欢，用
的很顺手。对于我提高6-8尺左右的距离的命中率帮助明显。
所有的杆里面，好的推杆可能贬值最慢的吧。 第一根推杆，用了一年，原价本地卖掉
。 这根sc的推杆，平时注意保护，基本上没有任何破损，头看起来和新的一样。
所有的杆里面，推杆也许是最可以下本钱买最喜欢而且顺手的，好好保护，可以用很多
年的。 |
|
m****n
发帖数: 815 | 20 刚才查了一下DCF的样子，真是不敢恭维。
高端推杆这档真是挺难做的。如果是classic的样子，肯定拼不过SC。如果做出些创意
来，通常都会失败。
了。 |
|
|
M*******m
发帖数: 168 | 22 今天看了一下杆子，发现很多dent,是不是forged的比较软，很容易打坏呀？以前没有用
过forged，想买一套二手的试试。 |
|
f*********n
发帖数: 11154 | 23 看到了一篇给Sabre Defence M4写的review，跟大家分享一下：
http://www.gunsmagazine.com/webextra0111.html
I impatiently waited six weeks for my Sabre Defence M4 sample to arrive,
however, the wait was well worth it. The XR15A3 arrived in an Allen
padded rifle case, along with two, 30-rd magazines, and an Otis compact
cleaning kit. The M4 was everything I had hoped it would be, and as
already mentioned, about as close as possible to the genuine military M4
configuration one could hope for.
I also appreciated the CNC... 阅读全帖 |
|
f*********n
发帖数: 11154 | 24 http://surplusammo.com/index.php?main_page=product_info&cPath=33&products_id=903
Factory New DPMS A3 AR-15 Complete Upper.
- 16" 4140 Chrome-Moly Steel Heavy Contour Barrel, 1-9 Twist, Chambered in 5
.56x45mm - A2 Flash hider - A3 Forged Upper Receiver w/Teflon® Coating -
GlacierGuards™ Handguards - Complete Bolt Carrier Group & Charging
handle - Forged Front Sight Base w/Bayonet Lug
These will work w/ any Mil-Spec. lower receiver. These are industry standard
"small pin" lowers.
Manufa... 阅读全帖 |
|
T******g
发帖数: 21328 | 25 AltlanticFirearms.com will be offering these in 762 x 39 , .308 , 5.45x 39
and 762 x 54R
"New Vepr Made in Russia Hunting /target rifle in traditional caliber of 7.
62X39mm. With 50% more HEAVY DUTY receiver that also has double
reinforcement and crowned with extra heavy duty Target like barrel ! A true
comparison is with the Russian tiger Draganov.Having made a reputation for
accuracy,This heavy duty Barrel not found on most other rifles has Chrome
lined chamber and Bore. This Vepr system along... 阅读全帖 |
|
g****r
发帖数: 1607 | 26 看上它10000发还能保持.5 moa. chrome lined barrel
RECEIVER
- Forged steel construction with flat bottom profile
- Short magnum action length
- External claw extractor with Controlled Round Feeding
- Blade ejection
- Integral recoil lug
- One-piece steel MIL-STD 1913 optics rail with an additional 20
MOA elevation built in
BARREL
- Hammer-forged, free-floating fluted barrel
- Chrome-lined bore
- Target crown
STOCK
- McMillan A3 fiberglass tactical stock
- Fully adjustable ... 阅读全帖 |
|
M*********e
发帖数: 3153 | 27 CA LEGAL
http://palmettostatearmory.com/1560.php
CA还没有AR的，想自己攒可以考虑了
PSA AR15 Lower
After almost a year of working on this project, Palmetto State Armory is
pleased to announce the release of our new AR-15 lower receiver. These
lowers are made using the most advanced aerospace manufacturing technology
to produce the industries finest, forged Mil-Spec lowers. Our receivers are
machined on a multimillion dollar, automated, manufacturing system which
enables us to produce a product of unequaled qual... 阅读全帖 |
|
l***a
发帖数: 2677 | 28 评价两星。。。
3/5/2011
1.0
e*****[email protected]
By jim estep
from Undisclosed
Comments about Central Forge 4" Swivel Vise with Anvil:
ACME NUT striped out in about a week. This is in a hobbyshop, not a
comercial garage.
3.0
O.K. for the price
By Jim
from Undisclosed
Comments about Central Forge 4" Swivel Vise with Anvil:
Vice itself work's great, but it tend's to swivel no matter how hard I have
it locked down |
|
t*****8
发帖数: 1274 | 29 AIMSURPLUS的这个不错, cold hammer forged的管子...包括bolt group, charge
handle等等...
Spike's Tactical 16" Elite CHF 5.56/.223 Upper Receiver
Price: $629.95ea
FREE Shipping on this item in the 48 States!
The Heart of the New ST Elite Mid-Length upper is the FN Cold Hammer Forged
barrel and Spike's HPT/MPI Nickel Boron M16 Bolt Carrier Group. These
Amazing CHF barrels are extremely durable with a 20,000+ round service life
and capable of shooting a 1/2 MOA group at 100 yards with quality ammo and
optics. The... 阅读全帖 |
|
T******g
发帖数: 21328 | 30 不同的一个package
http://www.calguns.net/calgunforum/showthread.php?t=482951
Barrel: A proprietary blend of Hammer forged chrome molly vanadium made by
FN that is referred to as "Machine Gun Steel" by virtue of its use in FN's
M249 and M240 weapons. The hammer forging process work hardens the steel,
making it more durable. In addition, the chrome process for the bore allows
for a lining almost twice as thick as a standard M16 for enhanced durability
. Chambered in 5.56 NATO, with a 1/7 twist, M4 barr... 阅读全帖 |
|
k*******n
发帖数: 5546 | 31 一个朋友在我的撺掇下，也搞了一把AR,虽然没有霰弹枪那么便宜实用，
但也还兼顾了休闲娱乐。今天我和他去靶场打了打。
他的配置是BCM SS410 16" Mid Length Upper，只加了一个Midwest Gen 2 Drop In的
管套，一个DD A1.5铁瞄。端起来比我同样16寸BCM BFH LW upper，明显感觉重了不少。
我发现BCM Noveske等公司的枪管号称Cold Hammer Forged,我一直想搞清楚，Cold
Hammer Forged 和 SS 还有普通枪管，在使用寿命、耐操、精度、重量上到底有啥区别？
如果让你们选择，你们选哪个？我都是买的BFH,是不是花冤钱了？其实我也让他买
BFH,但这老兄稀里糊涂，买错了。反正也无所谓，将错就错吧。 |
|
k*******n
发帖数: 5546 | 32
还是有点不太明白，打个比方说BCM卖的枪管有三种：
BFH （Cold Hammer Forged Barrels）
这种有镀铬？所以精度不好，寿命好？Cold Hammer Forged是什么工序？
SS410
这种不锈钢的没镀铬，所以精度好但寿命不行？ 不锈钢profile沉？
Standard
这种比BFH和SS410都便宜，是不是有镀铬，但没有CHF? |
|
g*****h
发帖数: 642 | 33 you should buy this one, I saw this after I bought the S&W from Buds
http://www.classicfirearms.com/long-guns/palmetto-state-armory-
FN Hammer forged chrome molly vanadium, 1/7 twist, M4 barrel extension...
FN 5.56 (.223 ) cal Mil Spec barrel The FN Barrel is made for Palmetto State
Armory by FN using their proprietary blend of Hammer forged chrome molly
vanadium that is referred to as “Machine Gun Steel” by virtue of its use
in FN’s M249 and M240 weapons.
In addition, the chrome process for the... 阅读全帖 |
|
d*****h
发帖数: 1266 | 34 Here's what SA's website says:
Every Springfield 1911 begins with a forged frame and slide as the
foundation for a true custom-quality pistol. In addition, Springfield forged
frames and slides are hardened in the tradition of John Browning's
discriminating specifications. While some of today's 1911 manufacturers use
investment castings or non-standard specifications when producing their
components, Springfield's commitment to quality remains absolutely stringent
, as does its dedication to the g... 阅读全帖 |
|
s*********r
发帖数: 4210 | 35 American Classic II 号称用forged slide. Frame 没说是forged 还是 cast. |
|
|
Z*********i
发帖数: 3422 | 37 PCR的FRAME也是FORGED,以下是CZ-USA网站PCR的介绍 （http://www.cz-usa.com/products/view/cz-75-d-pcr-compact/）：
The PCR is identical in size to the CZ 75 Compact, but thanks to its forged
aluminum alloy frame it weighs in at a full 1/4 pound lighter, making it
more comfortable for everyday carry. Equipped with a decocking lever, the
PCR is designed to be decocked before holstering. After decocking, the
trigger safety is much like that of a double action revolver. While there is
no need to flip a safety lever of... 阅读全帖 |
|
s*******n
发帖数: 12995 | 38 被雷达92不是钢的，也是合金的，sig226是铝合金的。低端1911的frame也是cast，800
以上的j基本上都是forged，但不保证零件都是forged,大部分的还有MIM parts. |
|
H****r
发帖数: 16240 | 39 我记得也是，以前有个urban myth
论坛上众口相传，说P01是forged，PCR是cast枪身
CZ官网就在最近改过来的
forged
up |
|
h*******m
发帖数: 253 | 40 各位同学：
本店准备进行一次团购：
Palmetto State Armory AR15
PALMETTO STATE ARMORY (PSA) OPTICS READY CARBINE w/6-POSITION CAR STOCK -
DOES NOT INCLUDE REAR FLIP-UP SIGHT
•Semi-auto •CMV 4150 steel constructed & chrome-lined barrel
features M4 profile & black matte phosphate finish •Dust cover &#
8226;Brass deflector •Forward assist •Carbine-length gas
port •1:7 RH twist •7075-T6 aluminum M4 flat-top Mil-Spec
upper is hard coat anodized black & equipped w... 阅读全帖 |
|
p******o
发帖数: 1119 | 41 帮我看看，$696 free shipping.
这把枪有没有明显的缺点，一定绝对不能买的原因。谢谢。
https://www.budsgunshop.com/catalog/product_info.php/products_id/411550993
Description
PALMETTO STATE ARMORY M4 ORC Rifle
This PSA Optics Ready carbine comes with a 6 position stock. It does not
include rear flip-up sight. The barrel is constructed of CMV 4150 steel and
is chrome-lined and has a 1:7 RH twist. The 7075-T6 Aluminum M4 flat-top Mil
-Spec upper is hard coat anodized black and equipped with extended feed
ramps, engraved T-marks, sta... 阅读全帖 |
|
d*******o
发帖数: 171 | 42 I just ordered the following parts from PSA, This will be my first build.
what else do I need?
AR15/M16 7075 T6 Forged Mil-spec Charging Handle
PSA 16'' Hammer-forged CMV Mid-length Stripped Upper - without BCG or
charging handle
M16 Bolt Carrier Group
Palmetto State Armory Premium Classic Lower Build Kit
Thanks, |
|
k*******n
发帖数: 5546 | 43 来自主题: GunsAndGears版 - 我下手早了 PSA用料不错，装配也OK,特别是这个FN的
Hammer Forged Barrel
Machine Gun Steel
Double-thick Chrome-lined bore and chamber
M4 Feedramp,
以及Forged Upper（Anchor Harvey做的，起码我手上的是“AH”）
上次在M4C和PSA的Jason Bane聊过几句，他们这个M4A1 Carbine upper一直卖得
不太好，大家一般都爱买Mid Length的，所以每次优惠都有它。
不过这个整枪+PRO+BUIS, 1000块，很划算了，比网上某些伪MIL-SPEC AR强不少。 |
|
h*******g
发帖数: 2201 | 44 Thanks for all the helpful posts that educated me.
My plan is to build a dream rifle AR for myself, shooting in the range and
try to improve my skill and defense in the 1/1000,000 chance of the so
called SHTF scenario. I would like to spend somewhere around $2000.00 to get
the best out of it. And I would like to order individual parts instead of
assembled upper to build to my liking, as Zman941's post said. I would not
care much about lower receiver, just want it to have a tight fit with the
upp... 阅读全帖 |
|
S**********s
发帖数: 4534 | 45 今天去店里看了一眼， Mega Arms卖光了， 但有一个"rifle gear Aggressor forged
lower"看起来和mega arms那个一样, 也有个能拧紧的螺丝， 只是标志是rifle gear.
一问店小二， 原来也是mega arms做的， 除了标志都是一样的东西。 价格比我以前看
的mega arms贵了几块钱， 估计是因为大选涨价了。
http://www.riflegear.com/p-1190-riflegear-aggressor-forged-stri
店里排长队， 还要拿号..在我站排的期间就有三个人订了AR。 便宜的5.56全被扫光了
。 照这个样子下去估计lower也要卖没了， 所以就拿下了。 |
|
w*****o
发帖数: 1806 | 46 那这个buds吹得很牛的Girsan牌1911怎么样？
http://www.budsgunshop.com/catalog/product_info.php/products_id
GIRSAN 1911 SERIES .45 ACP
It is very hard to find affordability and high quality in the same firearm
when it comes to 1911 pistols. However, there is now a series of 1911's
available from Girsan company that finally make this a reality for US buyers.
Precision crafted Girsan pistols definitely raise the bar on quality while
maintaining an affordable price.
Girsan 1911 pistols include CNC machined bar st... 阅读全帖 |
|
|
w*****o
发帖数: 1806 | 48 原来关键是：虽然都是milled receiver的AK，但是SLR是单排的整枪进口的，然后拆了
，切了，换了不少部件，改成支持双排弹夹，所以是个convert了的整枪；而SAM7是从
开始就造的double stack，所有部件都是新的，所以是个真正意义上全新的枪。
所以价差主要是两地labor的差别。2003年sam7就比SLR101卖的贵个150块左右。
http://www.ar15.com/archive/topic.html?b=4&f=64&t=58578
正像这里那位SSR-99兄说的，这两把枪还是兄弟，就是出生地不同，这个200的价差这
样说起来可能也算合理.
It's correct that for Arsenal Inc to make an SLR-101 into a double stack mag
shooter, they must put the SLR-101 through a conversion process. The SLR-
101 single stack gun arrives completely manufactured and... 阅读全帖 |
|
f********r
发帖数: 3155 | 49 如果你把Chuck Hawks当作gun god，你应该看看Chuck Hawks怎么贬Tikka T3的，这里
以前讨论过，哈哈
http://www.thehighroad.org/archive/index.php/t-211246.html
A Critical Look at the Tikka T3
(And Other Economy Hunting Rifles)
By Chuck Hawks
Like many old geezers, I bemoan the loss, or lack, of standards in our
modern world. And nowhere is this devaluation of quality more evident than
in 21st Century hunting rifles. (Actually, the slide started in the 1960's
and accelerated toward the end of the 20th Century).
We are, today, reap... 阅读全帖 |
|
h*********n
发帖数: 11319 | 50 http://palmettostatearmory.com/index.php/ar-15-05/complete-uppe
dissipator-16-5-56mm-1-7-mid-length-no-bcg-or-charging-handle.html
$399
Barrel length 16"
Hammer Forged Barrel
Machine Gun Steel
5.56 Nato Chamber
1 in 7" twist
Extra-thick Chrome-lined bore and chamber
Magnetic particle inspected
M4 feedramps
Forged upper
T-marks
MOE Rifle-length handguards
完美符合实战派们“护木长，管子粗，涂层厚，fsb”四大要求
此时不进更待何时 |
|
