f*********n
发帖数: 11154 | 1 Reloading refers to the process of re-using spent brass casing, with new
primer, bullet, and gunpowder. |
|
C*******r
发帖数: 10345 | 2 wow!
I was wrong.
Just found out Gamo offers plastic-tip pellets (same as hollow point) TOO. I
have a gamo .177 that shoots over 1000fps for lead pellets and 1200fps for
Gamo's brass pellets. One friend of the board even posted a story that
somebody killed a deer with the same gun. Amazing. |
|
|
p*x
发帖数: 961 | 4 这个blazer brass我们这里的几个walmart都好像断货的样子... |
|
l****8
发帖数: 969 | 5 Remington和blazer brass哪个更好？ |
|
D******r
发帖数: 491 | 6 remington UMC green box?
Blazer brass is better. |
|
f*********n
发帖数: 11154 | 7 今天去逛local的wal-mart,看到CCI Blazer Brass有货了。
淘了800发回家，.45, .40, 9mm终于又开始有点储备了。 |
|
o**********e
发帖数: 115 | 8 看地方。 我这里偏远的walmart卖子弹，卖武器，Blazer Brass常年有货，没有问题。
相反治安差的地区不卖这些，问起来都不知道Walmart还卖武器。 |
|
f*********n
发帖数: 11154 | 9 偶觉得wal-mart的policy有些奇怪。俺们这里靠近烂区的不买武器，靠近好区的也不买。
弹药倒是常年有，不过Blazer Brass过去6个月一直脱销。昨天他们刚进货不久，正好
碰上了。我前面那主连Winchester + Blazer收拾了将近$400。他和我把.40买光了。 |
|
c**d
发帖数: 3888 | 10 I buy all my 9mm luger from Walmart now. Blazer Brass -- $8.90 something
for 50 rounds. They had a special for $8.50 for a while and I bought a bunch |
|
n******0
发帖数: 89 | 11 我的STEYRER M40A1 打出的壳也和这类试,划痕甚至会及至BRASS, 我也很疑惑. |
|
T******g
发帖数: 21328 | 12 Here is what Phil said about the Incident. I know him from paintball
"I am a avid shooter and shoot twice a week, all of the guns are registered
to me including the assault weapons. all of the guns were lock in approved
DOJ containers made for transporting guns, not to mention that they were all
locked in the back of truck.. There is no law against bringing guns to the
airport as long as they are declared. which I did. I was cleared by the ATF
and the FBI on site..there was so much brass out the |
|
f*********n
发帖数: 11154 | 13 北卡。08年下半年CCI Blazer Brass在我们这里一直脱销，圣诞前才开始重新有货。 |
|
a***k
发帖数: 1255 | 14 我最近几个周末在休士顿几个Wal-Mart看过，Blazer Brass 9mm 是$8.97一合(50发)，
但是没有货。幸好我去年大选前看到$7.58一合的时候买了一千发。
Winchester的45 Auto以前是$28.30一合(100发)，现在也缺货了。 |
|
w*f
发帖数: 27 | 15 The blazer brass ammo at Walmart is good to go... I bought 500 rnds when
they were on sale @ $8.49/50 rnds... right now it's $8.99 but still a sweet
deal |
|
f*********n
发帖数: 11154 | 16 This is a bit difficult, because most pistols are test fired before leaving
factory as NIB.
Noticeable brass marks to the rear of the ejection port will appear if you
fire a few hundred rounds through a gun. Also look at the underside and the
inside of the slide, wear on the finish there can be sign the gun has been
fired in addition to factory testing. |
|
H****r
发帖数: 16240 | 17 我们这里MC Sports的Fiocchi 9mm打折，买来试试，第一张就是这种弹，第二张是以前
剩下来的CCI Blazer Brass，都是10码——两种其实我感觉不出来差别；第二张是慢慢
瞄着打，五个位置各十发。第一张除了左上以外，其他四个位置都是双扣打出来的。
以前支撑的弱手都是并排握好控枪的强手（差不多是指头压指头）；今天尝试把弱手位
置前移，就是食指甚至中指都不再压住强手（握把位置），而是从下往上托住扳机护圈
，同时强手大拇指完全放开，弱手大拇指也基本没用力，感觉比以前提高了不少 :)
另，CZ 75D的确不错。 |
|
f*********n
发帖数: 11154 | 18 晚上去了离家稍微远一些的一家wal-mart，居然还有16盒.40的CCI Blazer Brass，$12
.49 per box before tax，扛了4盒回家。 |
|
c********0
发帖数: 55 | 19 个人意见，Blazzer Brass的我用得不错。当时在沃玛买的，还挺便宜，不过现在到处
都没货了。现在非常后悔没有多囤积些。 |
|
a***k
发帖数: 1255 | 20 Blazer Brass, $8.97/50 rd. 帮朋友买500发,自己留500发.
在KATY, I-10@Fry Road那家买的,大概还剩下3000发的样子,在休士顿的同学可以考虑
去进一些.
.45和.40缺货. |
|
c********0
发帖数: 55 | 21 沃玛的这个CCI Blazer Brass目前看来还真便宜。网上现在基本都是$10.5以上+运费，
还无货。赶快囤积吧。。。我们周围4个沃玛早都被一扫而光了。这个沃玛居然还有存
货实在是个奇迹。。。 |
|
c********0
发帖数: 55 | 22 Wal-Mart Supercenter Store #3296
2700 South Kirkwood Drive
Houston, TX 77077
(281) 558-5670
在Kirkwood & Westheimer交界处。今天刚到的货，Blazer Brass,9mm 是$8.97+税。我
去的时候货架上有大约4000发左右。.40也有2000发左右。8合.45被我全收了。我后面
一个美国小伙，很紧张地问我，是不是要把所有9mm给买了。我说只买一部分，他才松
了口气。我们俩走的时候，货架上的9mm还有2000多发，.40有2000多发，.45没有了。
但是我觉得后面仓库里没准还有货。因为今天刚开的箱，售货员直接给我们用那个箱子
装回去--估计她在想，早知道不开箱直接卖算了。呵呵。
Houston的xdjm们，需要的和需要囤积的，动作快点啊~~~ |
|
f*********n
发帖数: 11154 | 23 什么牌子的弹夹,原厂的还是后来单独买的? FTF的时候下一发子弹在什么位置上？
Blazer Brass偶这把Springfield可能打了300发，记得出现过一次FTE，没有FTF。
Winchester也是300发，一次FTE，没有FTF。 |
|
f*********n
发帖数: 11154 | 24 嗯，偶刚才拿了一发Blazer Brass在偶得那把上比划了半天，子弹在进弹坡上一下就滑
上去了。Aleck你看看你那个坡是不是还很光滑？ |
|
a***k
发帖数: 1255 | 25 多谢乌衣蓝帽兄,飞猪兄,和炸雪人兄的建议,果然是进弹坡不够光滑导致FTF.
最近比较忙,上次三月初打过之后,一直到今天下午才有机会再去靶场.打了100发铝壳的
Blazer Brass,一次FTF都没有发生. |
|
f*********n
发帖数: 11154 | 26 .40 S&W Blazer Brass, $12.47 per 50 rds. |
|
|
p*******f
发帖数: 521 | 28 谁来说说 要买什么维护用品？ （我是不是应该再开一贴？这个太长乐。:) ）
1. clean rod, with brass brush?
2. Bore Cleaning Compound
3. cleaning pellet, pads
4. lubrication oil for different parts? (欢迎大家推荐）
5. ...？？？
还有就是在哪买？ PA 上的要不是kit不全，不好，就是太贵。 |
|
|
f****t
发帖数: 15913 | 30 The range even has brass catching net. I really appreciate that. |
|
u**c
发帖数: 27 | 31 Also make sure she wears a tight shirt that covers up to the neck. I've
witnessed more than 1 instances of hot brass stuck between boobs. Hilarious
but very painful for the girl.
A-cups do not need to worry |
|
l****8
发帖数: 969 | 32 Blazer Brass(50发),$8.97 |
|
l****8
发帖数: 969 | 33 点40的 Blazer Brass(50发),$12。99
我们这儿的靶场弹药缺货缺到只能打9毫米和点40HP弹，比普通的range弹要贵一倍呢，
且每人只能买一盒打靶，店员说如果弹药再这样持续缺一段时间，他们就维持不下去了
。。。由于弹药严重缺货，买枪和打靶的人都急剧减少，大厅里店员比顾客多，呵呵。 |
|
H****r
发帖数: 16240 | 34 我们这里的walmart，blazer brass也到了
但今天去看的时候发现只有9mm的还有货 |
|
s*****t
发帖数: 1661 | 35 broken.
Maybe the hole in the gear box is the problem.
Too much dirt in, then locked, finally broke to pieces.
I filled the hole by a brass piece.
Now the car has been working as a pizza delivery car for almost two month.
It is a 94 eclipse. |
|
|
O**e
发帖数: 246 | 37 Walmart Blazer Brass 50rnds $8.97 |
|
p*********e
发帖数: 32207 | 38 前面hetzer贴的链接,感觉回答部分那个shotgun装弹顺序有些价值,原文转过来
链接地址见下: http://answers.yahoo.com/question/index?qid=20080606011053AAMQN07
No 4 buckshot for home defense?
Okay my dads shot of choice for home defense is no 4 buckshot with high
brass.He says he chose it over oob because of the much higher ammount of
shot wich makes it 1 larger shot patterns 2 just as lethal due to the higher
ammount of pellets.Now ive been doing some reserch and some people are syin
that it cant be used for self defense due to the lack |
|
b**********y
发帖数: 7371 | 39 介大兄弟的UPPER RECEIVER咋没BRASS DEFLECTOR和FORWARD ASSIST呢？？ |
|
T******g
发帖数: 21328 | 40 我靠
这个yogo的铜壳铅芯军剩弹现在这么贵呀
http://www.ammoman.com/webstore_762x54R.htm
7.62 x 54R 182 GRAIN FMJBT BALL
PPU Mfg. (Yugoslavia)
LATE 80's EARLY 90's PRODUCTION
Brass Case - Berdan Primed Lead Core
( Copper Jacket / Non-magnetic )
15/ Box - 1,200/ Hermetically Sealed Case |
|
w*********p
发帖数: 7230 | 41 that red dot is a piece of crap.
try it at your local shop see if you like it. it is front heavy. and watch for brass kisses if you care about the looks |
|
A****r
发帖数: 2746 | 42 how much did you pay for yours? if you don't mind me asking.
for brass kisses if you care about the looks |
|
w*********p
发帖数: 7230 | 43 我不是都说了还有BRASS KISSES
做工显然是比上不足比下有余了
反正前面很沉，我很不喜欢，劝你最好试试
师傅，你自己跳出来吧
overall quality? |
|
d*****k
发帖数: 580 | 44 今天去枪店取枪，一个和蔼的老头子教导了我们一些注意事项，包括一个field strip
的小窍门，买了4盒子弹，CCI Brass 9mm 115 FMJ，小二说这是一般用于打靶的，14.
99一盒，外带4个小时的range free hours。
打了一个小时，发几张成绩单（7 yards & 10 yards 都是15发）。跟LP一起去的，结
果两个人总共只打了125发，LP装子弹比较慢：），其中还有50发是用Walther P99S打
的空包弹。
（宾州F1购枪记（上）：http://www.mitbbs.com/article_t/GunsAndGears/31211913.html） |
|
O**e
发帖数: 246 | 45 可惜的是价廉物美的blazer brass再也看不到了。 |
|
M******n
发帖数: 499 | 46 打的不好，但还是要献丑。
LD最近严打俺，将近三周没摸枪了。今天下午得了一个小时空，溜到靶场，二话没说就
开枪。一共打了4张B2靶纸，两张15yard, 两张25yard。打完收工。开车来回加上打靶
时间45分钟，算高效的了。：）
事先声明：
1。这个鸟靶场没有B2，只有T2，俺量了一下，尺寸没错，就是B2，不知道为啥叫T2。
有照片为证。
2。枪还是用的俺的Glock 17。子弹用的Blazer Brass。有照片为证。
3。靶场有长度标示，最远75feet。除了75之外别的标示都是整数，30，40，50，60。
俺把靶基本挪到了靠近50feet左右，绝对有45feet了。有照片为证。
4。站姿无依托。双手握枪。
不废话了，上靶。 |
|
f*********n
发帖数: 11154 | 47 http://handgunsmag.com/featured_handguns/HG_kimbercen_201009/index.html
You want something to remember the 21st century by? Then hike on down to
your gunshop and get in line for the Kimber Centennial Edition of the
1911. The Centennial Edition is built on a Government frame, in .45 ACP
(what else?)
The case is wood and leather, with a brass plate and maker’s label. The
fitted interior is done in green velvet, and each Centennial Edition will
have a special serial number prefix: MMXX. They will b |
|
|
|
c**********d
发帖数: 2428 | 50 也许我说得不够明白。我有一个装好了的LOWER，现在要把它拆成光的LOWER派别的用场
。BACK PIN好办，把BUFFER TUBE拆了，把弹簧和顶针点卸了就行了。不过这个FRONT
PIN就有点麻烦。不能从后面拆弹簧和顶针。顶针又是顶在FRONT PIN的槽里面。。。东
西不在手边，忘了FRONT PIN在打开状态是不是有一个通孔可以正对着顶针孔。。。
你是说用一个DOWEL PIN 然后用锤子狠心砸？这样好象不用BRASS PUNCH吧？普通的
HAMMER就行了。还是有什么绝活？ |
|
