由买买提看人间百态

topics

全部话题 - 话题: barrel
首页 上页 1 2 3 4 5 6 7 8 9 10 下页 末页 (共10页)
j***n
发帖数: 3786
1
来自主题: GunsAndGears版 - 18 or 20 inch barrel的ar有什么推荐?
just change the barrel to 5.56 then, Noveske offers both....

allowed
take
h*******m
发帖数: 253
2
来自主题: GunsAndGears版 - 18 or 20 inch barrel的ar有什么推荐?
SPR (special purpose rifle) 现在相当流行,不过你可以琢磨一下以下品牌:
LMT Defense 2000 with MRP
换barrel很快,精确度很高。大概2300,和我联系以下好了
703-435-4222
f*********n
发帖数: 11154
3
http://www.impactguns.com/store/736676101078.html
Barrel Length :5 1/2"
Capacity :10 + 1
Safety :Manual
Grips :Black Synthetic
Sights :Fixed Front ; Adj Rear
Weight :35 oz
Finish :Blue Steel
t*****8
发帖数: 1274
4
来自主题: GunsAndGears版 - Entire Delton kit with barreled upper for $499
Complete AR-15 kit for $499. THIS COMES WITH EVERYTHING TO HAVE A
FUNCTIONING RIFLE. It is all made by Del-Ton.
It comes with an M4 1:9 Chrome-Moly barrel with M4 feed ramps. It has a
"F" marked front sight base. It will shoot both 5.56 and .223. The stock
is a 6 position carbine. It comes with one mil-spec magazine. And yes, it
does come with a Del-Ton lower receiver. The T-marked flattop upper has
been assembled and test fired by a professional gunsmith.
http://www.sturmgewehr.com/webBBS/semi4... 阅读全帖
f*********n
发帖数: 11154
5
http://surplusammo.com/index.php?main_page=product_info&cPath=33&products_id=903
Factory New DPMS A3 AR-15 Complete Upper.
- 16" 4140 Chrome-Moly Steel Heavy Contour Barrel, 1-9 Twist, Chambered in 5
.56x45mm - A2 Flash hider - A3 Forged Upper Receiver w/Teflon® Coating -
GlacierGuards™ Handguards - Complete Bolt Carrier Group & Charging
handle - Forged Front Sight Base w/Bayonet Lug
These will work w/ any Mil-Spec. lower receiver. These are industry standard
"small pin" lowers.
Manufa... 阅读全帖
O*******r
发帖数: 753
6
thanks!
因为online forum论证过18" home defense vs20"smooth bore slug,貌似后者是压倒
性胜
利。
今天还看到 police barrel 18".

w/improved-cylinder-choke-rifle-sights/
a*****9
发帖数: 805
7
CL貌似不行啊,估计barrel 也算在里面了
b**s
发帖数: 4571
8
我需要一个1187的rifled barrel. 可惜。
r***6
发帖数: 401
9
http://www.dickssportinggoods.com/shop/index.jsp?categoryId=122
I live in Chicago area. The one store I went is by skokie on Toughy ave. The
original price is $349, sale price is $279 plus tax.
I tried out the gun last weekend. was able to shoot 2-3 inch group with
sabot slugs at 100yd. As for shotgun, I was able to shoot 22/25 traps. The
recoil is better than I expected because of the ported barrel. It is very
accurate, and I am very satisfied.
-r
r***6
发帖数: 401
10
来自主题: GunsAndGears版 - mossberg 500 rifled barrel or rifled slug
Absolutely sabot slug on rifled barrel. Yes it costs $4 a shot. But compared
with the rest hunting cost this is nothing. Using sabot slug essentially
extend your range from 50 yd to 125 yd.
-r

我理解Choke的作用应该主要是控制多个小弹丸的散步的。对单一大弹丸,slug,一般
应该也没问题,但是多了不见得好,因为这种大弹丸对chock的压力有时还是可能比较
大的。
★ Sent from iPhone App: iReader Mitbbs 7.39
M*******y
发帖数: 263
11
来自主题: GunsAndGears版 - mossberg 500 rifled barrel or rifled slug
YES, I would prefer a remington 700 308 to hunt with.
but being a student with tight budget, my wife won't agree with any more
purchase now.
that is why I will keep finding ways to hunt deer with this 28inch
modified choke barrel and rifled slug.
S**********s
发帖数: 4534
12
来自主题: GunsAndGears版 - mossberg 500 rifled barrel or rifled slug
What kind of sights does this barrel have?
If it's bead, you're kinda stuck with 50yard, and it's a little troublesome
to install new sights on mossbergs, requires a little soldering.
you're better off with a top rail (mossy's receivers are pre-drilled for
rail installation)and a sturdy low power scope.
S**********s
发帖数: 4534
13
+1
另外除非长期以此为乐, 不推荐买专门打slug的枪。
真要买,买一个像mossberg 590, 930之类accessory齐全的, 换个管子和extension
tube就可以实现不同目的。 18寸家防, 28寸full choke打鸟打飞碟, 24寸rifled
barrel打鹿, 换个管子半分钟的事。
S**********s
发帖数: 4534
14
mossberg barrel如果写了"isb"那就是integral scope base, 就是枪管上带一条皮轨
换枪管就不用拆scope了。
P*******o
发帖数: 460
15
我刚买了一支28寸的Super Nova,pump action还没拿到手。不过没买他的rifled
barrel。
听您这么一说,我是很想买mossberg,觉得比较瓷实。

extension
s**e
发帖数: 395
16
Another option is rifled slug for sighted smooth deer barrel, a lot cheaper,
still accurate at 75 to 100 yards, and it is not picky about the ammo, but
dont try it on any farther target
P*******o
发帖数: 460
17
那个Mossberg 930的来福管是Cantilever Barrel则好,如果是铁瞄那我干脆连镜子钱
都省了,也免得担心被撞成熊猫眼:)
h*********2
发帖数: 2508
18
FN SLP有一款也是rifled barrel专打slug的,不过好像不好找
c*****a
发帖数: 477
19
Rifled Barrel打rifled slug? 理论上是不要这样打。 但有人非要这么打不可,那也没办法。
另外,若smooth bore打rifled slug打得准,也没人研究出sabot slug了。
d********d
发帖数: 497
20
搭车请教一下,下面这几个 Light Weight Upper 那个算是比较物美价廉?
【1】 PSA 16" Hammer Forged Midlength Light Weight upper
http://palmettostatearmory.com/index.php/ar-15-05/complete-uppe
PSA这个没有说FSB是多少。难道不是 pencil barrel?
【2】 BCM BFH 16" Mid Length (LIGHT WEIGHT) Upper Receiver Group (.625FSB)
http://www.bravocompanyusa.com/BCM-BFH-16-Mid-Length-Upper-Rece
下面是网上找来的重量比较
BCM 16" SS410 (Ionbond black) midlength upper assembly weighs 3lb 3.8 oz or 51.8 oz
BCM 16" BFH lightweight midlength upper assembly weighs 2lb 11.2 oz ... 阅读全帖
f****t
发帖数: 15913
21
tactical solutions make high quality bull barrels for 22/45.
http://www.tacticalsol.com/tshome/tactical-solutions-pac-lite-b
d**********g
发帖数: 2014
22
来自主题: GunsAndGears版 - 新枪试射Mossberg 930 (Rifled Barrel)
我上次在那里,sight in rifle了,我没量,大约100yard 1.5MOA,没来得及
微调。没有望远镜实在太不方便了。
后来sight in shotgun rifled barrel,这个便宜scope,调节开关太cheap了。
50yard 基本sight in,然后100yard脱靶了,时间到了,我没追究为什么。
所以我还得回去一次。
看了很多youtube,这次我知道应该怎么做了。上次浪费了很多子弹,后来请教了那边
工作人员才有点眉目。cabelas 的sight in实在离太远了,和你的情况相似。
r***6
发帖数: 401
23
来自主题: GunsAndGears版 - 新枪试射Mossberg 930 (Rifled Barrel)
PistoLeo,
You need to buy a cheek raiser for the rifled barrel. Otherwise your head
wont mount on the stock well and recoil can hurt you.
-rc
j***n
发帖数: 3786
24
来自主题: GunsAndGears版 - AR Upper List with Cold Hammer Forged Barrel
I have 20" PSA CHF barrel, want it?

CHF
k*******n
发帖数: 5546
25
来自主题: GunsAndGears版 - AR Upper List with Cold Hammer Forged Barrel

打算买哪家的SS match grade barrel?
H****r
发帖数: 16240
26
来自主题: GunsAndGears版 - canted barrel ...
然而,回来仔细看就觉得不对
拿了水泡一测果然不对!
啊啊啊这就是左轮会遇上的canted barrel。
刚给ruger客服写了信,看什么时候能寄给我回邮的ups盒子:P
又,.38的子弹真贵
+P的更贵
.357的还要再贵。
H******S
发帖数: 6011
27
来自主题: GunsAndGears版 - canted barrel ...
明天去靶场不?试试这个canted barrel的效果?
r***8
发帖数: 43
28
来自主题: GunsAndGears版 - canted barrel ...
我最近也在看SP101。请教一下肉眼怎么看有没有canted barrel?
P****8
发帖数: 678
P****8
发帖数: 678
30
来自主题: GunsAndGears版 - Sig P226 .40 换用9MM BARREL
是,不过我看老美的坛子上有人说也可以直接换其他口径的。另外这个Bar_sto的
BARREL怎么样?换了以后精度有下降吗?
m*****8
发帖数: 292
31
来自主题: GunsAndGears版 - 想把手枪的BARREL POLISH 一下
好像黑枪加不锈钢的 BARREL 挺好看的,不知道会不会很容易生锈
m*****8
发帖数: 292
32
来自主题: GunsAndGears版 - 想把手枪的BARREL POLISH 一下
Looks great, pistol Barrel only $35.00.
plus mailing, I guess 50 to 60 bucks, pretty good deal.
I wonder if I should do my p30
m*****8
发帖数: 292
33
来自主题: GunsAndGears版 - 把BARREL给POLISH了,上图
说干就干,把BARREL给POLISH了,上图
半小时搞锭
m*****8
发帖数: 292
34
来自主题: GunsAndGears版 - 把BARREL给POLISH了,上图
1 老美的white vinegar,最便宜那种,两刀一大瓶,把BARREL塞到vinegar泡一小时,
据说GLOCK还要长点时间
热水冲干净
2 用dremel buffer 加点FLITZ 磨 就搞定了
茅厕用纸擦干净
3 上油
you can get Flitz at walmart or homedepot, just need a little bit of it.
t**********e
发帖数: 1590
35
我不是老手。如果说错了,还请老手们更正和补充。
首先,重管和轻管精度差不多。轻管在打得多的时候,barrel就会变热。在这个时候,
精度可能就会下降。其次,短时间内打得多,轻管比重管热的快,热度持续的时间长,
也会影响寿命。如果你是为了连续突突用的,就用重管。如果不是,选择轻管。
S**********s
发帖数: 4534
36
FNAR即使是轻管也不是很轻的pencil barrel, 至少不会比USGI M14差。
轻管也可以很准; 震动幅度大不代表不准, 只要震动幅度和频率每次相同就好。
SCAR的枪管就都精细,但仍然靠精度击败了HK.
轻管拎着打猎不累, 重管只能当靶枪; 反正你也没花重管的钱, 是福不是祸。
j****N
发帖数: 1289
37
来自主题: GunsAndGears版 - shotgun barrel清洁贴士。。。
在amazon上找gun cleaning时发现了这个这个评论,丹碧斯吔。
For 12 gauge shotguns, use the rod, but buy up some Tampax Original Regular.
When you fluff them out, they work perfectly as a patch for thoroughly
cleaning a 12 gauge barrel.
t******8
发帖数: 2803
38
how do I determine whether mine has the "提早开锁" problem? And if it has
this problem, the stormlake and the factory original one will be both bad?
And what grain of bullet are these barrels optimized for? 115 124 or 147?
Than kyou!
t******8
发帖数: 2803
39
谢谢!
对fitting barrel以提高精度的方法我总是担心会影响到可靠 -- less room to
tolerate dirt.
恩,星期六就去sharon ville打一打25yd benchrest。手枪打benchrest有没有什么其
他讲究?我准备装个TLR-1上去,把灯搭在沙袋上。以前打benchrest把magpul的RVG搞
断了,这回可千万不要把frame搞烂掉。
b*****e
发帖数: 5133
40
147gr就是打得更准你也不可能就吊死在这local不好买的子弹吧。
还是先试115/124gr的,打的漫天飞时再考虑下一步吧,呵呵。
话说有几位买了M&P的,又是换整套apex,又是上fitted barrel。得,结果一把枪就成
了HK的价。不过对一些人来说折腾出一把很准的枪应该比不折腾买一把很准的枪更有成
就感。
有兴趣可以看看折腾的那些人的长篇讨论:
http://www.brianenos.com/forums/index.php?showtopic=157995&st=0
r***6
发帖数: 401
41
For home defense, would mossberg sa 20ga 18.5" barrel be good?

You can never go wrong with a benelli m2and screw 20 gauge.
S**********s
发帖数: 4534
42
big 5 should have mossberg 500 combo
comes with 18.5 + 28 inch barrel.
S**********s
发帖数: 4534
43
来自主题: GunsAndGears版 - Glock 34 ported barrel
打过一次Glock 19C, factory ported barrel
非常爽, 没后座没上扬。
S**********s
发帖数: 4534
44
来自主题: GunsAndGears版 - Glock 34 ported barrel
晚上barrel porting明显的喷枪焰,会晃眼睛。
初速会减一些,等于缩短了枪管。
s******9
发帖数: 1451
45
来自主题: GunsAndGears版 - Glock 34 ported barrel
拿来打着玩挺好。备战/跑路枪最好不要ported barrel.
Lone Wolf 的枪管质量不错。
x*x
发帖数: 90
46
来自主题: GunsAndGears版 - mossberg500 with rifled barrel
可以再买个barrel换,否则只能用Sabot Slug.
S**********s
发帖数: 4534
47
来自主题: GunsAndGears版 - mossberg500 with rifled barrel
Rifled barrel也可以打rifled slug, 只不过没有打sabot slug精度好
m***y
发帖数: 14763
48
来自主题: GunsAndGears版 - mossberg500 with rifled barrel
有来复线了后,散弹喷出去的时候会旋转,结果就是一定距离后就成了O型环,这是散
弹的大忌。据说有补偿的技术,但老汉嚼得是不是过于复杂化了?Riffled barrel你就
打slug好了嘛,还想办法补偿?
u**r
发帖数: 810
49
来自主题: GunsAndGears版 - 家防手枪9mm, 4“ Barrel火力够吗?
新手请教,想买walther ppq m2, 看到有4“ 和5” 的,不知道5“ barrel是否必要,
或者相反-子弹动能太大易于穿透墙体?假设用hollow point子弹。
u**r
发帖数: 810
50
来自主题: GunsAndGears版 - 家防手枪9mm, 4“ Barrel火力够吗?
谢谢回复,如果你买ppq m2为家防,你选4“ barrel 还是5”?
首页 上页 1 2 3 4 5 6 7 8 9 10 下页 末页 (共10页)